How to deal with dampness in the bathroom

Generally speaking, the main causes of dampness on the bathroom wall are as follows:

1. The waterproofing of the wall of the bathroom is not done well, and when the moisture or water vapor in the bathroom cannot be discharged in time, it will enter the wall. In this way, the wall will naturally become damp after a long time. Especially after showering, if the water vapor cannot be dispersed in time, it is more likely to cause the wall to be damp.

Solution: In this case, the only way to do a new waterproofing is to do a new one, otherwise, the entire wall will be affected.

2. The water pipe in the bathroom is broken, resulting in the dampness of the wall caused by the water penetrating into the wall.

Solution: To carry out a water pressure test on the water pipe, if there is a problem with the water pressure, then it is a problem with the water pipe, and it needs to be repaired to solve the problem.

The bathroom is a relatively humid place, even if there is no problem with our waterproofing and water pipes, there may be dampness on the bathroom wall, which is because there is no way to discharge the moisture in time, so the accumulation of time will make the wall damp. Therefore, in daily life, we should wipe the water vapor on the floor and wall of the bathroom in time, and then pay attention to maintaining the ventilation of the bathroom, so that the water vapor can be effectively placed to penetrate into the wall.

There are two main problems with dampness in the bathroom:

1. Poor ventilation conditions in the bathroom.

2. The bathroom waterproofing is not done well.

Bathroom damp solution:

1. Install an exhaust fan, if you don't want to install an exhaust fan, Fu Bang family doctor recommends installing a special air conditioner for the bathroom to speed up the dissipation of water vapor and achieve the effect of dehumidification in the bathroom.

2. If the waterproofing is not done well, it is recommended to re-do the waterproofing in order to fundamentally solve the waterproof problem, and the material must be made of waterproof function. In addition to the above two methods, attention should also be paid to maintaining indoor ventilation on a daily basis.

I hope the above sharing can give you some help, thank you!

Ventilate windows or turn on exhaust fans.

Bathrooms at home need to be well ventilated to avoid dampness. How to deal with the dampness in the bathroom? Let's take a look.

1. The exhaust fan is the basic equipment of the bathroom, and the exhaust fan can be turned on frequently, in addition to discharging the moisture in time, it can also discharge the filth of the bathroom, which is conducive to physical health. If you do not have an exhaust fan, you should close the door when you leave the bathroom after taking a shower and allow the moisture to condense before entering to dry or blow dry with an electric fan. There is an integral shower room, so be sure to close the door when showering.

2. If there is no Zhaoqiao dry and wet partition in the bathroom, then please try to install a shower curtain to prevent the bath water from splashing; Pay special attention to the moisture-proof and dehumidification of the bathroom and toilet socket, once the power supply leaks due to moisture, the consequences are unimaginable.

3. Dry and drain the bath bomb. In addition to drying the water in the bathroom in time after each wash to prevent moisture, you should also try to give full play to the function of a bath bomb. Because the infrared quartz heating bulb in the bath bomb is used as a heat source, Sun Tsai can heat the indoor air through direct radiation and play the role of drying moisture.

The ventilation function of the bath bomb can also remove some moisture. Therefore, for families who do not have external windows in the bathroom, installing a bath bomb is a good choice.