-
Anonymous users2024-01-24Pry the floor tiles around the toilet sewer pipe, and chisel the toilet sewer pipe around it into a "V" shape, and the area is a little wider. Then plug and compact the chiseled place, and then mix the waterproof agent with cement and sand to make waterproof mortar for waterproofing, and by the way, leveling and subsidizing the floor tiles, it can be solved.
-
Anonymous users2024-01-23It should be that the joint point is not connected properly and leaks. Find the leakage, clean it, polish the outer wall of the capillary, find a section of UPVC one end and grind it flat, break it, polish the inner wall of the hair, apply UPVC glue evenly and then stick it on, pay attention to connect it with the outer end face of the previous joint. In this way, a lot of sewer pipes are treated, and the leakage problem at the joints is basically solved, and the price is also very cheap.
-
Anonymous users2024-01-22This one is leaking.
The first one is the raw meal tape and then sealed with glass glue.
The second type is to add a sealing ring at the tee.
-
Anonymous users2024-01-21It is best to seal it with a special PVC water pipe sealant after it is out of use, and pay attention to the dry and clean interface as much as possible.
It is definitely not possible to wipe with glue, like this I generally can reconnect if I can reconnect, and if I can't reconnect it, I will drop the section of pipe in front of the leakage, and carefully shave out the pipe in the pipe fittings with a razor, and reconnect it with a live joint. It should be noted that you must be careful when shaving off the 110 old pipe in the pipe fitting, otherwise it will be more troublesome if the pipe fitting is damaged.
Before the plumbing is installed, a hole is made in the structural panel of the restroom preparation and the hole is larger than the diameter of the drain pipe. If the size of the drainage pipe is DN110, the diameter of the hole in the structural plate will be greater than 11cmTherefore, there will be a void between the drainage pipe and the structural slab (i.e. cast-in-place concrete slab), and when the filling and sealing treatment of the cavity is not in place, the problem of water leakage will occur. >>>More
Your water seepage problem is more complicated, first of all, the toilet and sewer pipe are not installed tightly, resulting in the overflow of toilet water, and the only way to deal with it is to reinstall it. The second is that the waterproofing of the bathroom is unqualified, resulting in the water leakage of the ground to the downstairs, the waterproofing is not done, and it is difficult to re-do the waterproofing, so you can only apply some waterproof glue around the sewer pipe as a remedy. FYI.
The sink is the most important transmission tool for kitchen sewage and is an indispensable part of the kitchen. What do you do if your kitchen sink is leaking? First of all, we need to find out the exact cause of the leaking kitchen sink. >>>More
Causes and solutions of PVC drain pipe leakage:
PVC pipe rupture and leakage: It is recommended to replace the pipe fittings. >>>More