-
Anonymous users2024-01-24Step 1: Prepare some scrap newspapers and cut them into scraps with scissors.
Step 2: Add an appropriate amount of alum to the paper scraps and stir well.
Step 3: Pour the paper scrap and alum mixture into a pre-prepared container, add a small amount of water, and stir again.
Step 4: Place the container on top of a simmer and cook until it becomes a paste. Stir constantly during the steaming process.
Step 5: Fill the cracks in the solid wood furniture with the boiled paste mixture and allow it to air dry.
Step 6: Use a paint pen or a special furniture repair pen to paint the filled area to harmonize it with the color of the whole furniture.
You can also go to Taobao to search (solid wood furniture cracks, damaged repair paint repair, furniture repair putty) The price is a bit high, about 260 yuan,
-
Anonymous users2024-01-23As promised, chase the conservative ideology of Han liquid.
If there are cracks on the surface of the paint layer of the ceiling, it is generally because the paint layer is too thick or too dry, then the surface of the paint layer should be removed first, and then the new primer will be brushed up, when the primer is dry, the primer needs to be painted again, and then the latex paint is brushed up. Related information: 1. If the crack in the ceiling is caused by too much change in indoor temperature, a seam paper should be pasted at the crack position first, and then the latex paint will be painted on the seam paper, and then the putty will be painted again, and when the putty is dry, it will be polished and smoothed, and finally painted with a topcoat. >>>More
It is recommended to apply essential home moisturizer.
After the first application of the moisturizer, the furniture absorbs 10 times faster than the local log furniture, and in just 2-3 minutes, the first application of the moisturizer is completely absorbed. >>>More
Find a decoration company to check it, if it is a crack in the base layer, it is necessary to see whether it is accompanied by hollow drums, the size of the area, if the area is larger, the place should be chiseled off, and smeared with cement mortar in several layers, after drying, paste fiberglass cloth or high-elastic fiber paper tape in the place, the area should be larger than the chiseled area, and then scrape the putty and paint it. If it's just surface cracking, just shovel off the putty, stick fiberglass cloth or high-elastic fiber paper tape, then scrape the putty and paint it. Chenguang nano silver high-efficiency antibacterial interior wall latex paint is healthy and environmentally friendly, dirt-resistant and weather-resistant, and of excellent quality. >>>More
1. Cracking of the surface layer of the paint: first clean up the cracked paint film, repaint the paint, and sometimes need to seal the substrate with a primer. 2. Cracking caused by temperature changes >>>More
Cause of cracking 1: Moisture content of solid wood.
If the moisture content of solid wood furniture is not well controlled, there will be quality problems such as cracking and deformation. After the furniture is produced, the moisture content and drying stress of the wood determine whether the shape and material of the furniture will change again. Therefore, it is very important to control the moisture content of solid wood furniture, and the balanced moisture content will not crack and deform due to environmental factors such as sunlight, overcooling, and overheating. >>>More