-
Anonymous users2024-01-241. Concealed installation is conducive to frost resistance, it is not easy to be frozen in winter, iron absorbs energy faster, and it is easier to freeze off in winter, 2. Concealed installation is not easy to oxidize, there is more water vapor in the bathroom, it is easy to oxidize after a long time, and concealed installation has a long service life inside; Although it is stainless steel, it is not a real stainless steel, and it oxidizes for a long time, affecting the life and appearance.
3. Concealed decoration is more beautiful for the bathroom.
-
Anonymous users2024-01-23It is best to install it openly, as stainless steel will oxidize and rust over time under the influence of high and low temperatures underground.
-
Anonymous users2024-01-22Stainless steel is best installed surface, only along the lower wall of the cabinet.
The infill wall of the frame structure building is also not allowed to open transverse grooves, because the wall itself also has the problem of self-weight and horizontal load, and the wall is very thin, 200 mm, with extremely low stiffness, and must not be weakened. The wall is very long in the length direction, for example, 4-5 meters, and the stiffness in this direction is very large, so the vertical groove has little effect.
The distance between the toilet sewer pipe and the Rose Pavilion is 330 350 from the wall, so that the distance between the center of the toilet drain and the outside of the toilet can be about 420 430, and at least 400. Nowadays, no matter what kind of toilet, the bend and gas have been formed into a whole, so the ground drain should be more than 600 meters from the wall, which is very good for the toilet.
Generally, they are concealed, and they occupy a position and are not beautiful. When purchasing a dark valve, you must pay attention to the quality.
Generally, the washbasin is about 450mm, the shower is about 1150mm, the dun cloth pool is about 300mm, the toilet is about 250mm, and the distance between the washbasin and the squatting toilet is about 400mm, and the distance between the toilet and the bathtub is about 500mm, but it also needs to be determined according to the specific situation of the bathroom at home, and the above data is for reference only.
Bathroom valve is best surface-mounted, once the valve is broken, easy to replace, if concealed, it is very troublesome to replace the valve, sometimes you need to break the tile, so there are a lot of people who suffer losses.