How to look at the polishing process of mahogany furniture

It can be carefully identified by touching it and looking at it twice. The so-called touch is to gently stroke back and forth with your hand. When stroking, do not follow the lines, but should go against the lines.

As for the second look, it is to look far and close. From a distance, it is to see whether the contour of the whole furniture is symmetrical, whether the edges and corners are flush, and whether the overall structure is coordinated; A close look is to see whether the texture of the furniture is clear and bright, whether the lines are compatible, and then see whether the gaps at the joints of the mortise and tenon joints are moist and moist, and whether there are cow burrs. Learn more about the identification of mahogany furniture through the official account of the wood industry.

Coarse grinding: The tools for coarse grinding are mainly blades, and the workers and masters cut out scrapers with different widths and narrows on the iron sheet according to the shape of the furniture, and then sharpen the tips with different arcs and thicknesses. In order to ensure that the scraping surface on a flat surface, the master generally uses a wet rag to moisten, and then scrapes off the wet wood, and judges whether the thickness of the scraped is the same according to the color change of the wood after absorbing water.

Mahogany furniture wood is greatly affected by changes in air humidity, and some surface textures will have tiny cracks due to drying, so it is also necessary to use glue to paste the wood powder into it to ensure smooth and warm. Fine grinding. Compared with coarse grinding, fine grinding tests the patience and experience of workers.

It is understood that the general mahogany furniture factory uses different types of sand and centipede planers to polish the furniture. Different types of sandpaper also have their own division of labor in the process of furniture grinding, 120-600 models of sandpaper is used to polish the basic shape of furniture, 600-1500 models of sandpaper is to polish the details of furniture, 1500-2500 models of sandpaper is to make furniture more charming. Water Mill:

The method is to wipe the parts wet with a damp cloth and use the corresponding tool to polish the uneven parts of the line in all directions. After the wood fiber expands when exposed to water, some wood fibers on the surface are stripped out, which is the so-called "burr", after scraping and grinding by dipping in water, the "burr" is gone, the surface of the parts is smoother and more delicate, and the color change can be uniform in the subsequent air oxidation, so that the formation of hardwood furniture pulp is fast and the pulp is thick. At the same time, after water grinding, the "depression" or "understubble" on the surface can be detected.

In scraping, where there are traces of water, there are depressions, which are not smooth or have stubble. Through the water mill, the four sides of each part of the furniture are smooth, the whole furniture no longer has a stiff chamfer, and every line should be smooth and full, so that the fine workmanship has made a good paving for the subsequent waxing process.