-
Anonymous users2024-01-24Find a pen and measure the switches and sockets.
If you don't know how to measure it, you don't know it at all.
It's better to find an electrician to solve it quickly and safely, hehe!
The rest of the lights in the house are good, the sockets are good, but the three sockets in the kitchen are not good"
How many electric switches does the landlord's house have?
-
Anonymous users2024-01-23Is it the main switch in the house If it is Lala lighting If the light is on, it means that it is a socket in addition to the problem Just change the socket If not, you take it apart and measure it with an electric pen Is there electricity If there is a thing about you or the socket.
The wiring is partially damaged, and the current home wiring should be separated from each part, and it won't be all broken all at once, just find an electrician to take a look.
The inspection method is as follows: each socket is plugged in with electrical appliances to try, if the landlord determines that only these two sockets are plugged in and tripped, one possibility is that the two sockets to the distribution box branch switch of the line leakage (the line is damaged, the live wire and the grounding wire are in contact with each other), the second possibility is that the zero ground is reversed, and the electrician who originally helped you arrange the wire at home came to the door to eliminate the leakage fault. >>>More
The same set of sockets just can't be plugged into two high-power appliances at the same time, if the low-power ones don't matter.
The water vapor in your house is too large, so in this case, it is better to use a waterproof socket. Otherwise, water vapor is more likely to enter the socket and cause danger. Although the waterproof socket is not fully sealed, it still has a certain airtightness.
If all the branches of the distribution box are not tripped, it is also necessary to measure whether the output terminal of each switch has electricity, some switches are damaged and do not trip but are not conducted, if all switches have electricity it is a line problem, the line is broken or the connector is disconnected.