Hello. The walls of our house are moldy, and the bathroom is leaking. The decoration said that the a

Updated on Bathroom 2024-07-13
6 answers
  1. Anonymous users2024-01-24

    What you mean is very incoherent.

    The problem is this, 1. The angle valve is broken, leaking, the person who repairs the toilet has replaced the angle valve, the angle valve is no problem, or the problem of water leakage and water seepage, and the result is that the wall is soaked in water and moldy.

    Answer: The water in the shower area seeped into the mortar layer, the water has nowhere to flow, the wall has sucked the water, has not been able to dry, for a long time, the putty or ICI wall of the wall, moldy.

    How to solve it? Look at the seepage of water to there, if the water seeps into the bedroom next to the bathroom, then you have to renovate the shower area, the shower area is showered every day, there is a lot of water, because the slope of the ground is not very good, so the water accumulates, so the ground has the opportunity to soak in water, the saturation is enough, and the wall has moisture. Redo it under the ground.

    If it's not very serious, just put a circle of glass glue in the shower area, and it's fine.

  2. Anonymous users2024-01-23

    There is a American Keshuifu invisible waterproofing agent that can help you find the leakage point and don't know how to fill the leakage problem This product 1, the penetration is very strong, can penetrate into the building to form a permanent waterproof layer;

    2. The waterproof layer is transparent and colorless, and does not change color, so it does not affect the original design style of the building;

    3. The product can be used as a wall waterproofing agent, or mixed with cement to make high-efficiency waterproof cement mortar;

  3. Anonymous users2024-01-22

    Dear, it's that the waterproofing on the walls of your home has not been done or made low.

  4. Anonymous users2024-01-21

    The tiles and floor tiles you put on are hollow, you knock on them, that's why the walls are moldy.

  5. Anonymous users2024-01-20

    Move the PPR joint of the outlet to the outside of the wall, and then close the interface with glass glue between the tile and the tile.

  6. Anonymous users2024-01-19

    Should it be normal? So what else to ask?

Related questions
The upstairs bathroom in our house is leaking
1 answers2024-07-13

Sue as a neighboring rights dispute, demanding that the queue obstruct and compensate you for your losses.

Our bathroom is leaking, which brand of waterproof material is better?
2 answers2024-07-13

Waterproof engineering is one of the key projects in home decoration, every family attaches great importance to waterproof work, but waterproof materials are the key to do a good job in waterproof engineering, I will introduce you to a few trustworthy waterproof brands! >>>More

Hello, the southwest of our house is the bathroom, I heard others say that you need to hang a gourd,
2 answers2024-07-13

Bathroom hangers are prone to mold. How can immortals be placed at will? You have to actually look at the hexagram to know whether you should use a gourd or not.

Hello experts, can the floor drain leak in the upstairs bathroom of our house be wet, and can it be
1 answers2024-07-13

If you want to repair it below, you can properly open a small hole in the leaking part and pour foamed cement; But the best solution is to pour water-based waterproof paint from above.

Downstairs said that our bathroom was leaking, and there was a watermark on the ceiling of the room
4 answers2024-07-13

1 The waterproofing of the bathroom is not done well, and the location may be up and down at the intersection between the ceiling of the room next to the bathroom and the floor of the bathroom. 2 Is the bathroom a buried pipe, if it is a hidden pipe, it will be slotted, is it not waterproof in the groove after slotting, and the pipe will be walked. The slotting mentioned above belongs to the low position.