After my toilet flushed. The drain does not store water. How do I fix it?

Updated on Toilet 2024-07-08
2 answers
  1. Anonymous users2024-01-24

    If there is water storage after flushing and then it disappears little by little, it should be a dry crack in the pipe, only to remove it and repair it, it is better to replace it with a new toilet. If there is water storage but it is very small, then check whether the water supply pipe in the water tank is not plugged in, and just plug the water supply pipe in. The make-up pipe is a thin hose above the water supply valve.

  2. Anonymous users2024-01-23

    Check that the make-up pipe in the tank has not fallen out and insert that hose into the overflow hole of the flush valve.

Related questions
1 answers2024-07-08

The toilet flushes very slowly, and there are the following solutions to cooing after flushing1Finding a half-inch-wide bamboo stick and sticking it into the toilet to unclog it will solve the problem. >>>More

1 answers2024-07-08

Generally, in this case, the person who buys the material will make a return air hole, which is normal.

1 answers2024-07-08

Add oxalic acid or descaler and wait 10 minutes before rinsing.

4 answers2024-07-08

Theoretically, the current toilet has an S bend, that is, there is a water seal and deodorization, and there should be no insects flying out. If it's an old-fashioned toilet, it's recommended to replace it with a new one. That is, odorproof and clean.

3 answers2024-07-08

Caulk is not good, you should use the plugging spirit, kick the drain around a little bit, and then fill it with the plugging spirit.