How to properly renovate a hardwood floor

1.The use of 24 mesh, 60 mesh, 120 mesh sandpaper, belt sander, edge edge, to ensure that the surface of the floor is delicate and smooth.

2.Scraping putty can ensure the natural color of the floor, and the floor will not be scratched.

3.Floor paint, the application of environmentally friendly water-based floor paint, will not make the room have peculiar smell, the floor paint must be a special floor paint, its wear resistance can meet the requirements of the floor.

4.Special wood floor wax and polishing machine, as well as DCS vacuum system, are used to ensure the shine of the solid wood floor. Here's how it works:

1:: Use a special large-scale vacuum floor renovation machine, first smooth and coarse grinding the floor, and then fine grinding and polishing, so that the surface is smooth and delicate and the wood grain is clear. Two:

Use the special transparent putty matched with the floor paint, scrape on the sanded floor and wait for drying (5---10) minutes, use wood-colored solid putty to fill the gap between the floor and the floor, and then use 360---600 gauze paper to polish and dry, scrape the putty for the second time, and polish and dry. Three: Use a small bucket to mix the crystal floor paint in proportion Use a high-quality wool brush to paint the paint on the floor in order to dry for (5---8) hours.

Four: Use 360---600 water sandpaper to dip the first paint in water and carefully grind it to make the surface smooth and delicate, and then carefully dry and paint the last floor paint for better results.

1. Judge the grinding conditions.

Whether the wooden floor of the basketball court can be renovated depends on the thickness of the floor surface and the type of flooring. Because the renovation of the old floor has to grind off the thickness of the surface layer by 1 2 mm, the surface layer is not thick enough and is worn through will cause the renovation of the wooden floor to fail.

There is a layer of aluminum oxide wear-resistant layer on the surface of laminate flooring, and renovating wood flooring will destroy its wear-resistant layer and aggravate the aging of the floor.

The thickness of the surface layer of multi-layer solid wood flooring varies, and the thickness of the thin skin is generally about millimeters, so the thickness of the surface layer cannot be renovated, while the thick skin can be renovated.

Hardwood flooring and three-layer parquet products have a surface thickness of about 4 mm and are therefore generally suitable for refurbishment.

2. Clean up the site.

When it is determined that the wooden floor of the basketball court can be polished and renovated for maintenance, the wooden floor of the basketball court that needs to be polished and renovated should be cleaned on site. Make sure the basketball court is clean and remove all items from the court.

3. Rough grinding.

You can use a rough grinder and a fine grinder to polish the wooden floor of the basketball court successively for rough grinding and fine grinding, polish off the original surface of the floor renovation by 1 2 mm, and polish it from 40 mesh, 80 mesh, and 120 mesh sandpaper step by step, so as to ensure that the surface of the floor is delicate and smooth.

4. Polishing follow-up.

After the grinding of the wooden floor of the basketball court is completed, follow-up processes such as putty, coloring, painting, and polishing are also carried out. Using putty mixed with wood chips for the floor can ensure the natural color of the floor, and the floor will not be scratched.

The wooden floor of the basketball court has been used for a long time, and there will always be scratches or other defects that need to be renovated, so how to renovate the wooden floor of the basketball court? Euclidean sports wood flooring engineers for everyone to popularize science:

1.Before the renovation of the wooden floor of the basketball court, the wooden floor of the basketball court is sanded many times with a large floor renovation machine to remove the surface layer, wood and lacquer layer of the floor, and then sanded to make the surface of the floor smooth and delicate to a new degree.

2.The wooden floor of the basketball court should also be kept flat when renovating, and a small angle grinder can be used to polish the corner of the wooden floor of the basketball court, so that the wooden floor of the basketball court can achieve the overall smooth and flat effect.

3.Remove all the original transparent putty in the gaps of the wooden floor of the basketball court, and then re-seal and seal the wooden floor of the basketball court. 4.

After the gaps in the wooden floor of the basketball court are cleaned, put a primer on the floor, wait for the primer to dry thoroughly, brush the topcoat again, after the topcoat is brushed, be sure to wait until it is completely dry, carefully polish the floor with sandpaper, so that the surface of the floor feels slightly rough by hand, and then remove the powder that falls when sanding the floor, and then brush the second topcoat.

5.After the second coat is dry, the floor is waxed, and the basketball court wooden floor is waxed, and the floor renovation work is done.

6. The wooden floor of the basketball court is different from other floors, after a period of use, it needs to be renovated and maintained, the degree of renovation and maintenance of the wooden floor of the basketball court depends on the degree of use of the floor, which is generally renovated once every five years after installation, at this time, the service life of the wooden floor of the basketball court is actually very long, and the wooden floor of the basketball court will look very old, and the wooden floor of the basketball court needs to be renovated and maintained once.