How wide is the door to the bathroom

Generally, the family bathroom is 700mm, but it should not be less than 600mm.

It is as big as the door, about 80 centimeters.

700-800MM IS ENOUGH, REMEMBER TO ADOPT IT. 65 cm, the size of the door and the bathroom is proportional The bathroom door of the office building is generally 5cm narrower than the other doors, and the proportion is 650-

Standard width: 80cm

General Width:70cm-75cm

Minimum width: not less than 60cm

Residential Building Code requirements

The minimum width of the door opening of each part The name of the part The minimum width of the opening (m) The door of the household (set), the living room (hall), the bedroom door, the kitchen door, the bathroom door, the balcony door.

Causes

The width of the bathroom door is determined by ergonomics, and if it is too narrow, it is inconvenient to enter and exit the bathroom. The width of the public restroom door should not be less than 75 cm and should be designed for the general public.

Bathroom Layout

1. Independent type: bathroom, toilet, washroom, etc. are independent.

2. Dual-use type: Gather sanitary ware such as bathtubs, washbasins, and toilets in one space.

3. Compromise: The basic equipment in the sanitary space, some independent parts are put in one place.

Bathroom door classification

Plastic steel doors, steel plate surface wood core doors, aluminum alloy (aluminum-magnesium-titanium alloy) doors, stainless steel and glass doors, etc.

Among them, aluminum alloy (aluminum-magnesium-titanium alloy) door has good waterproof performance, more styles and rich colors.

Precautions

1. The sliding door of a single toilet bathroom should have a net width of at least 650mm, and the construction drawing generally leaves a 700mm door opening for the toilet.

2.Double-leaf toilet and bathroom sliding door, ordinary net width of at least 650mm, door width of at least 1300mm. If two streams of people pass through at the same time, the door width needs to reach 2200mm.

3. The space of the bathroom is relatively small, and if the bathroom door is the same size as the bedroom door, it is not beautiful. The size of the bedroom door is usually 2m*, and the size of the bathroom is usual.

The choice of bathroom door size determines the success or failure of bathroom decoration to a large extent. Therefore, it is very important to choose the right size bathroom door. There are many styles of bathroom doors, such as swing doors, sliding doors, etc., which one to buy depends on the style of the bathroom and the size of the bathroom.

The size of the bathroom door is generally 2000mm*850mm, and the minimum width is not less than 750mm. If the door width is less than 700, it is very difficult to get in and out, and if it is less than 600mm, the bathroom cabinet can not enter, and the thickness is generally between, and the doors sold on the market are basically of this size. In fact, there is no specific size standard for the bathroom door, mainly depending on the door opening at home and the setting of the bathroom.

If the door is open inward, the size of the sink should be smaller. If the bathroom door is intended to open outward, you don't need to consider the size of the bathroom, but it takes up more space in the hallway. It takes up more space to open the meeting outward, so it is recommended to choose a sliding door, or you can choose a folding door, the opening of the folding door is about 80cm wide.

Now the door is generally even the door with the door cover, the thickness of the door cover is 3-5cm, both sides are 6-10cm, the thickness of the bathroom aluminum alloy door is from there, and the minimum width of the bathroom door is 60cm.

The size of the bathroom sliding door is based on the size of the bathroom you need, and it needs to be measured on the spot. Generally speaking, if the bathroom uses a single-sided sliding door, the width of the bathroom door is at least 650mm, and the construction drawing generally leaves a 700 door opening for the bathroom. If you want to do a sliding door, push it against a wall.

The two-way sliding door leaves a 650mm passage for a single strand of people, and the door width has to be 1300mm, and the door width is 2200mm for the double-strand flow to pass through at the same time.

Bathroom doors are the most frequently used doors in the entire house. So, how wide is the bathroom door? Generally speaking, 70-80cm is enough! There are three points for installation precautions, inspection, installation, and inspection.

Many people will consider when installing, how wide is the door of the bathroom? Most of the bathroom doors are matched with doors and door covers, most of the door sets are 3cm-5cm thick, 2 sides are 6-10cm, and the bathroom door is at least 60cm. When purchasing, you should pay attention to its standard regulations, all manufacturers have their own requirements for size and color.

Pay special attention when choosing. The door of a single bathroom generally needs a clear width of 65cm, and the design is generally designed to leave a position of 70cm; The double bathroom door should generally have a clear width of 65cm, and the door width should be at least 130cm. If two people are going to pass together, the door width needs to be at least 220cm.

The door of the bathroom is generally wide, basically 70cm*200cm.

After solving the problem of how wide the door of the bathroom is, it is time to start the specific installation.

Before installation, it is necessary to open the package and inspect the goods, and carefully check the quality problems that can be seen with the eyes in all aspects of the product. The door leaf should be separated from the door and window, not directly placed on the ground, not placed together with acid and alkali, and the room should be kept dry and ventilated. Also avoid heat.

Inspect the site and clean the work area to see if the door opening or door frame is the right size. Confirm the specific installation size, prepare the tools, and inventory the accessories.

When installing, each gap should be tight and not uneven; The gap should be filled with styrofoam to fix it. After the door frame is installed with the ground, it should be filled with filler. The installation and interface of the sleeve should be fixed, and at the same time, it should be kept flat, and the sleeve on the same side should be kept in the same plane.

The gap between the sleeve and the wall should be sealed with sealant.

The standard door is flat and vertical after installation, and the door leaf is level with the door sleeve; The door opens and closes flexibly and silently; The gap between the door sleeve and the door leaf meets the standard; The error of the gap should be plus or minus millimeters; The door should be fixed when closed and will not swing.

The bathroom is also a very important place in our home, so we should also pay attention to it when installing. The door must be carefully considered before installation, and the question of how wide the bathroom door is should be determined in general, and then install it according to the steps to achieve the best results.

Bathroom doors are generally 80cm wide for the following reasons:

1.Generally speaking, the standard width of the bathroom door of the home is 80cm, and the minimum should not be less than 60cm. That's because if it's too cramped, it's a lot of inconvenience when getting in and out of the bathroom.

On the other hand, it is OK to keep the maximum width at 80cm. If there are special cases, the width can be specially customized. The width of the public restroom door should not be less than 75 cm and should be designed for the general public.

2.If the bathroom is opened inward, the size of the sink should be smaller, but it will not affect the aisle space. If you open it outward, you don't need to consider the size of the bathroom, but it takes up more space in the aisle.

In this case, a sliding door is generally selected, and one side of the wall can also be made into a folding door, with an 80-wide door opening.

3.For the classification of bathroom doors, you can generally use plastic steel doors that are reliable but not very beautiful, doors with steel plate surface and wood core, doors made of aluminum alloy (there are also aluminum-magnesium-titanium alloys), stainless steel and glass doors, etc. Generally, ordinary households like to choose aluminum alloy (there are also aluminum-magnesium-titanium alloy) doors made of material, because of good waterproof performance, more styles, and richer colors.

4.According to various layouts, toilets can be divided into three forms: dual-use, free-standing, and eclectic. Toilets with separate bathrooms, toilets, washrooms, etc., are called free-standing toilets.

Sanitary wares such as bathtubs, washbasins, and toilets are grouped together in a single space, which is called a dual-purpose type. The basic equipment in the sanitary space, which is partially independent and partly in one place, is called eclectic.

Generally speaking, the standard width of the bathroom door of the family is 75cm, and the minimum can not be less than 60cm, which is because of the ergonomics, if it is too narrow, then there are many inconveniences when entering and exiting the bathroom, and the relative maximum width can be kept at 80cm. The width of the public restroom door should not be less than 75 cm and should be designed for the general public.

The choice of bathroom door size determines the success or failure of bathroom decoration to a large extent. Therefore, choosing the right size of the bathroom door will effectively enhance the owner's taste of life and highlight the care and care of the family.

First of all, it is necessary to understand how to classify the bathroom. According to various layouts, toilets can be divided into three forms: dual-use, free-standing, and eclectic. Toilets with separate bathrooms, toilets, washrooms, etc., are called free-standing toilets.

Sanitary wares such as bathtubs, washbasins, and toilets are grouped together in a single space, which is called a dual-purpose type. The basic equipment in the sanitary space, which is partially independent and partly in one place, is called eclectic.

Secondly, to know the classification of bathroom doors, you can generally use plastic steel doors that are reliable but not very beautiful, doors with steel plate surface and wood core, aluminum alloy (there are also aluminum-magnesium-titanium alloy) material doors, stainless steel and glass doors, etc. Generally, ordinary households like to choose aluminum alloy (there are also aluminum-magnesium-titanium alloy) doors made of material, because of good waterproof performance, more styles, and richer colors.

Finally, if the bathroom is open to the inside, the size of the sink should be smaller, but it will not affect the aisle space. If you open it outward, you don't need to consider the size of the bathroom, but it takes up more space in the aisle. In this case, a sliding door is generally selected, and one side of the wall can also be made into a folding door, with an 80-wide door opening.

The door is generally connected with a door sleeve, the thickness of the door sleeve is generally 3 to 5 cm, 2 sides are 6 to 10 cm, and the width of the bathroom door is at least 60CM. Bathroom door size selection also needs to consider the manufacturer and brand, each manufacturer has a different impact on the size and color, as well as the overall style of the room. You need to pay extra attention when choosing.