-
Anonymous users2024-01-24It's clear that the pipes are not smooth and there is a blockage! Do a good job of dredging, and the problem will be solved.
-
Anonymous users2024-01-23This must be that your pipe is blocked, but not completely blocked, and there is a small void, and you can only shoot a little sewage, so the backwater is dirty water, and it is recommended that you dredge the pipe.
The sewer may be blocked, it is recommended to find a professional to deal with it, and I wish you a happy and worry-free relationship.
: The reason why the toilet is a siphon is the principle of siphoning, as shown in the figure below, when the water level exceeds the S-bend, the water will flow down.
The reasons for the dirty water that always returns to the top after flushing the newly installed toilet are as follows: 1. The sewage pipe is blocked. 2. The reserved height of the cutting pipe is not level with the ground. 3. The toilet bowl is not tightly sealed, which becomes the source of odor.
If there is a backwater situation when the household uses the sewer by itself, then it means that the drainage pipe is blocked, and the pipe can be dredged through dredging agent or dredging machine, or more serious, you need to contact professional workers to repair and deal with it. 2. If there is a backwater situation when the residents are not using the sewer, then it is likely that the main drainage pipe of the building is blocked, and this situation requires a high-pressure water truck to impact the sewer pipe, remove the dirt on the pipe wall and dredge the sewer pipe through water pressure.
The sewers are blocked!
Let's find a leather pinch and press it yourself a few times to see if it's okay? >>>More