How to fix the toilet bowl on the ground, with screws

Fixing the toilet to the ground can prevent the toilet from shifting and leaking, here are a few ways to secure the toilet:

Use a toilet retainer: A toilet retainer is a tool specially used to fix the toilet, which can fix the toilet on the ground, and when using it, you need to screw the toilet retainer into the bottom of the toilet bowl, and then fix the toilet bowl to the retainer.

Fixing with cement: Fixing the toilet with cement is a traditional fixing method, which requires drawing the location of the toilet on the ground first, and then using cement to fix the toilet on the ground. The following points need to be noted: the cement should be fully dried, and water leakage should be prevented after fixation.

Use silicone to fix: Using silicone to fix the toilet is a relatively new method of fixing, which requires applying silicone to the bottom of the toilet first, and then fixing the toilet to the ground. The advantage of using silicone fixing is that the toilet can be fixed quickly and prevents the toilet from shifting.

Regardless of which method you use, you need to pay attention to safety to prevent problems such as leakage and slipping caused by improper toilet fixing. At the same time, before installing the toilet, it is necessary to measure the flatness of the floor to ensure that the ground is level.

The toilet bowl is fastened with expansion screws. The inside of the connection between the base and the pipe is made of toilet sealant. The outside is a cement slurry prepared with white cement and white glue. When buying a toilet, it is generally equipped with a special sealant.

Don't use cement or anything, it's easy to make the toilet crack, the screws should be rusty, it is recommended to use white glass glue, and it's okay to have full glue at the bottom. Or all of them. A kind of 2113 is a foot column skirt bag that is all in the toilet bowl and cannot see 5261 after installation.

The main thing is to firmly fix the 1653 elbow with the ground. Then connect the toilet body to the elbow. Then the toilet bowl and the floor are glued and fixed, and then the toilet body and the elbow are fixed together with screws.

There is also a foot post non-skirt bag. It's the kind of screw fastening that you can see from the outside.

Install the toilet: first check the ground drain to see if there is any garbage accumulation in it, if there is one, we must carefully check and clean it. If it is not cleaned well, it is likely to cause problems such as clogged toilets. Try to install the toilet outlet first, mark the hole of the toilet with a marker pen, and then remove the toilet.

Make a hole with a height of 6 cm in the marked place, and then twist the 1 cm bolt into the hole with cement. Then put the toilet on to see if it fits, check it and remove it. Then apply putty around the toilet outlet pipe and sewer pipe buckle, then align the bolt holes with the twisted bolts and straighten them up.

At present, the common ground-mounted toilet does not need to be screwed on the ground, unless it is a suspended smart toilet or the like, in order to strengthen its firmness, it is indeed necessary to make screws on the wall.

The steps to install a common floor toilet are: after we clamp the corresponding sewer pipe, keep the ground clean and dry, and at the same time, smear the bottom of the toilet with cement and place it on the ground, so that the toilet and the ground can be more fitted. After it dries, apply sealant or glass glue directly to the contact area between the toilet bowl and the floor, and then trim it to let the glue dry and set before use.

Nowadays, toilets are generally heavier, and they don't need to be screwed, so they can be placed on the ground and sealed and fixed with glass glue.

The toilet bowl is very simple to fix on the floor, and there is no need to make screws. After the installation is in place, a circle of glass glue is applied to the junction between the toilet bowl and the floor, and it will be firm after a few hours.

If the toilet is fixed on the ground, then it is okay to use screws, because screws can fix the toilet to the ground, and then with some glass glue, the toilet can be firmly stable on the ground.

The toilet does not need to be fixed by screws, people who have experience in decoration know that the bathroom will be paved with floor tiles after doing waterproofing, and the pipe of the sewer will be reserved in the position of the toilet, and the toilet will be connected in the reserved position after the purchase is returned, and the base of the toilet itself is relatively flat, after the right position, the toilet has basically been positioned, and then with glass glue, a circle is closed at the bottom of the toilet, which has both a fixed role and a waterproof effect, so that the installation of the toilet has been completed.

The toilet must be fixed on the ground with screws, otherwise it will move if it is unstable, so most families fix the toilet on the ground with screws. Find a professional to install it, don't install it yourself.

Yes. There are reserved bolt holes on both sides of the toilet, and the packing box is also equipped with fixing bolts and invisible covers to cover the bolts and keep them beautiful, and then seal the edges with sealant. But now many people do not bolt when installing, and only fix it with sealant, which has certain hidden dangers.

The toilet is not fixed to the ground with screws, but after it is placed on the ground, it is flattened and fixed to the floor tiles with glass glue.

There are several ways to fix the toilet on the ground, and some are fixed by two screws on the ground drilling, which is the strongest and longest.

There are also fixed with cement ash, and more often with glass glue.

Now there is a glue that specializes in sticking toilet bowl fixations and is very strong.

Of course not, the toilet bowl is generally glued with glass glue on the ground, and the toilet is glued to the ground with glass glue around the sewer pipe.

In the past, the operation was fixed with screws, but now many people operate with special glue, which has been proved to be feasible in practice. It is recommended that you give it a try, and everyone does not seek to be consistent. Rely on your own experience. Screws are susceptible to moisture and rust, making them cumbersome to repair and replace.

If you want to fix the toilet on the ground, you don't need to make screws, you can glue it with glass.

The toilet does not need to be fixed, just align it with the drain pipe card and glue the edges.

Do use screws, there are screw holes under the toilet.

It is mainly fixed with cement.

After putting it in the right position, just put a circle of glass glue around

The general toilet installation method of big brands: put a latex ring on the sewage outlet at the bottom of the toilet (sold in bathroom stores), then aim at the sewage outlet on the ground, press it, and then at the connection between the toilet base and the floor tile, put glass glue, and after 24 hours, the glass glue is dry, and then use the toilet, there is no difficulty.

The connection between the base and the pipe can be connected with a flange ring or not.

Structural adhesive and white cement for the base can be used, and glass glue can also be used if there is none.

It's all hit. One is that the eye-punching is all in the toilet bowl and cannot be seen after installation, the so-called foot pillar skirt bag. The main thing is to firmly fix the elbow with the ground.

Then connect the toilet body to the elbow. Then the toilet bowl and the floor are glued and fixed, and then the toilet body and the elbow are fixed together with screws.

There is also a foot post non-skirt bag. It's the kind of screw fastening that you can see from the outside.