-
Anonymous users2024-01-24This one. Those who sell everything say that they are good. The ground moisture is well proof, and the air humidity does not have such a big impact on the floor, as long as it is not blistered.
-
Anonymous users2024-01-23You can use anything, even if you use ceramic tiles, the cement will absorb water and expand due to heavy moisture. In fact, it is 3 points of material and 7 points of construction, pay attention to the material of the wooden floor during construction, whether it has been tightly sealed, and then the height of the ground is about 20 cm, and the material of the height must also be sealed (this is omitted by many carpenters), and finally the room should be kept ventilated and not damp. If you choose tiles, try to choose small pieces, not too large blocks, and use elastic soil to fill the gaps.
Do not use sea sand for cement, otherwise the tiles will easily protrude in alternating weather. In fact, it is a problem of construction, and the relationship with the material is not very large.
It is possible to lay solid wood floors, but the selection of wood boards must pay attention to the quality of the board, whether there is a special floor heating, to avoid dry cracking. >>>More
Specific problems are analyzed on a case-by-case basis. But it's generally better not to use it. Because the solid wood floor will be dried before oiling, the manufacturer will carry out humidity control according to the needs of customers in different places. >>>More
Of course, the reason for choosing pure solid wood at that time was that the solid wood floor heating floor of nature does not use glue, does not contain formaldehyde, and will not harm the body, you can go to the physical store to learn more about it.
Solid wood floors can be wiped with vinegar, which not only has the effect of sterilization and disinfection, but also makes the floor shiny as new. >>>More
No, the hardness of imitation solid wood is not enough, it will collapse, and the length of imitation solid wood is not necessarily the same as the original solid wood. The easiest way is to fill in the middle of the keel and then lay it. >>>More