-
Anonymous users2024-01-24Flat ceiling is generally made of PVC board, gypsum board, mineral wool sound-absorbing board, fiberglass board, glass and other materials, the lighting lies in the top plane or sucks on the roof, because the roof of the room is generally arranged in the bathroom, kitchen, balcony and entrance and other parts. The common ceiling methods are mainly as follows:
Special-shaped ceilings
The special-shaped ceiling is a kind of partial ceiling, which is mainly suitable for bedrooms, study rooms and other rooms. The method is to use the form of a flat ceiling to block the pipeline at the top in the ceiling, and the top surface can be embedded with a downlight or a fluorescent lamp, so that the top surface after decoration forms two levels and will not produce a sense of depression. The cloud-shaped wavy line or irregular arc used in the special-shaped ceiling is generally not more than one-third of the overall top area, and it is difficult to achieve good results if it exceeds or is less than this ratio.
Partial suspended ceilings
The partial ceiling is a partial ceiling method used to avoid the water, heating and gas pipes at the top of the room, and the height of the room does not allow all the ceilings. The best mode of this method is that these water, electricity and gas pipes are close to the side wall, and the decoration effect is similar to that of special-shaped ceilings.
Grille-type hanging items
First, a frame is made of wood, inlaid with translucent or frosted glass, and the light source is on top of the glass. This is also a kind of flat ceiling, but the shape is more vivid and lively than the flat ceiling, and the decorative effect is better. It is generally suitable for dining rooms and foyers.
It has the advantage of being soft, relaxed and natural.
Caisson ceiling
The premise of this type of ceiling is that your room must have a certain height (above, and the room is larger. Its style is to carry out a partial ceiling around the room, which can be designed as one or two floors, and the effect of decoration has the feeling of increasing the height of the space, and it can also change the lighting effect of the interior.
No ceiling decoration
With the fashion of decoration, the boom of ceiling decoration soon passed. Since housing in the city is generally low, after the ceiling, it feels oppressive and dull. Therefore, the decoration of the top surface without decoration has become popular.
The method of non-ceiling decoration is to do a simple plane modeling treatment on the top surface and use modern lighting.
The lamps, with their delicate angular lines, also give a relaxed and natural pleasant style.
-
Anonymous users2024-01-23There are many kinds. Traditional gypsum board ceilings, aluminum gusset ceilings, general calcium silicate board ceilings, as well as aluminum square ceilings, and now new materials, mainly depends on how to design, different designs, ceiling methods are diverse, and the design method can basically be said to be in one mind, itself is also ever-changing.
1. Concave and convex type
This style of kitchen ceiling is often referred to as a moulded ceiling, specifically a form of ceiling with a convex or recessed surface. The shape of this kind of ceiling is more complex and varied, with a strong sense of hierarchy, and is usually suitable for top decoration such as kitchens, halls, foyers, restaurants, etc., and it is often used with lamps and lanterns, including ceiling lights, chandeliers, downlights, spotlights, etc. It has a strong artistic atmosphere, so it is loved by people who like art. >>>More
Generally speaking, the wall decoration is mainly based on brushing latex paint or wallpaper, both have their own advantages and disadvantages, latex paint may be cheaper, but the effect may not be very good, wallpaper is expensive, but the aesthetic effect is good, and the time of good wall pipe is longer.
There are three types: front launch, middle launch, and rear launch.
Flat ceilings.
Flat ceilings are generally made of PVC board, gypsum board, mineral wool sound-absorbing board, fiberglass board, glass, etc., and the lighting is placed in the top plane or on the ceiling, which is generally arranged in the bathroom, kitchen, balcony and hallway. >>>More
The room is still the bathroom, I don't know how to know the way.