Why can t the toilet suck

Updated on Toilet 2024-07-20
5 answers
  1. Anonymous users2024-01-24

    1. Dun cloth method: use your mopping dun cloth. First put the cloth at the mouth of the toilet, and then put water to ensure that the water submerges the cloth.

    Then press the cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the cloth as fast as possible, repeat this action, the things in the toilet will be sucked out, and the pipe can be unblocked.

    2. Find a longer section of plastic water pipe, connect the tap water at one end, plug the toilet mouth into the toilet mouth at the other end, and then block the toilet mouth with rags and other things, and then turn on the tap water, which will use the water pressure to dredge the pipe.

    3. Go to a 2 yuan store or grocery store to buy a manual dredge (something that looks like a spring), and dredge it yourself, and a dredge is a few yuan.

  2. Anonymous users2024-01-23

    Plug the toilet mouth with a round cloth, seal it as tightly as possible, pour in an appropriate amount of water, and then pull it out, you can! If there is no round, you can tie a little more do not towels on a stick, the same effect.

  3. Anonymous users2024-01-22

    Put it full of water, put the leather stick against the drain, push it back and forth several times to make it tight, slowly press the water down to the end and lift it up. This repetition will definitely pay off.

  4. Anonymous users2024-01-21

    Put some water in the toilet, a little more is better. Aim the toilet bowl at the mouth of the pipe and press down firmly. Instead of sucking up! If it doesn't work once, come back a few more times. Remember that there must be water in the toilet. Otherwise, there is no pressure.

    If you still can't suck it, it's time to change to a good toilet to suck it.

  5. Anonymous users2024-01-20

    Can't suck?? What does it mean, drainage problem or, water ingress problem.

Related questions
2 answers2024-07-20

It is best to use a leather puff to block the sewer and only change the chain, and you can judge it, you must work hard, this leather kick is aging and cannot be breathable. Press back and forth a few more times, and then pour a basin of water on top to make Zhao Qin Jin press down and up to change a new leather pouch.

3 answers2024-07-20

Apply a little water to the edge of the suction cup in a circle.

1 answers2024-07-20

Don't be in a hurry, put the water first, and then use it to slowly pull back and forth a few times. If there is no water that does not form a vacuum, it cannot be pulled out.

2 answers2024-07-20

If you can't suck it out, the toilet suction is to temporarily suck up the water and filth in the toilet to a certain height when the toilet is clogged, so that the hole of the sewage is temporarily opened, and then the things are discharged little by little. If your toilet is not clogged, if the plastic spoon is sinking, then at most it can suck up water. You can bring a glove and try to touch if there is anything inside, because the inside of the toilet is a U-shaped channel, and it is not easy for heavy objects to be flushed away, just like a mobile phone falling into the toilet, which is not easy to be flushed into the sewer. >>>More

2 answers2024-07-20

I suggest you take a photo to illustrate, so that I can give you a reply, I preliminarily judge that it should be the sanitary ware inside the tank for a long time, due to the use of friction or the aging of the rubber, if this is the case, replace a set of water tank sanitary ware can be solved, pay attention to the replacement must be your water tank size (the net height inside) measured, it is best to take a few photos with your mobile phone to the merchant to see, you do not understand the premise that it is best to let the merchant installer come to replace, a good point of sanitary ware plus labor costs within 100 yuan.