Why can t the toilet be flushed, it seems that the flush is not enough, how to adjust it?

Updated on Toilet 2024-07-11
6 answers
  1. Anonymous users2024-01-24

    What should I do if the toilet is slow and weak and can't be flushed.

  2. Anonymous users2024-01-23

    I think the patency is still not good, and there are still blocked links in the sewer part.

    Let's find a sewer dredge worker, it has little to do with impulse.

    The first time it was flushed, the second time it couldn't be flushed, but as long as it was flushed again every other time, it seemed that the water was released before the amount of water was enough, and it seemed that the strength was insufficient.

  3. Anonymous users2024-01-22

    The flushing effect of TOTO is very good. The current situation analysis is as follows (personal opinion): First of all, check whether the amount of water on the water tank has changed from before, and whether it is less. In addition, the water flow rate has become smaller. (The flow is small, there is a blockage of sand).

    If not, you can consider the problem of piping. Find a drain to dredge, but use an air pressure dredger. As soon as he said that he was in the water, he would know.

  4. Anonymous users2024-01-21

    It is necessary to wait until the water in the tank is full before flushing, and the water is not enough.

  5. Anonymous users2024-01-20

    It's not a problem of not having enough momentum, is it? Either the time interval between the two flushes is too short, you know, the tank pumping also takes 3 or 5 minutes!

    Check the problem with the water tank!

  6. Anonymous users2024-01-19

    If you really can't help it, take a leather pick

Related questions
The toilet poop won't flush
3 answers2024-07-11

You disassemble it to see if the spring of the lower tank is loose, mediate, this is insufficient water pressure, and check whether it is blocked.

Experts say what to do if the toilet water doesn't flush
1 answers2024-07-11

This condition is a clogged toilet bowl and can be unblocked using the following methods: >>>More

What should I do if the toilet won't flush?
20 answers2024-07-11

The skin is very powerful.

What should I do if the feces block the toilet and can't be flushed
4 answers2024-07-11

On the one hand, you have fallen into something, such as a small spoon clip, stuck in the sewer, so that the stool can not be flushed, on the other hand, the stool is dry and knotted caused by the inability to flush down, it is recommended to consider the strong dredging agent of Ping An Chase, the effect is good. Specializes in blockages such as urine alkali, hair, hairpins, etc.1

The squat toilet does not flush the water
2 answers2024-07-11

Now the design of civil housing is not allowed to install squatting toilets, because the sewage pipe has not been designed to reverse water, if you must install a squatting toilet must backfill the ground 30-40 cm, in the original sewage outlet installation of anti-water settings, in order to install a squatting toilet, do not see the scene, I don't know whether the installation of your backwater bend is appropriate, the correct installation of the backwater bend directly affects the effect of sewage discharge, but such a situation must be a problem here, you can find professional personnel to check it.