-
Anonymous users2024-01-24The water used in the edging machine should be replaced frequently, and the traces of polishing powder under the control of the beveled edge should be cleaned immediately after the edging is completed, and other aspects such as scratches should be kept clean from the cutting table, edging machine, cleaning machine, and the roller table of the tempering furnace, and there should be no sand. Bursting edges, tempering and the like look at the performance of the main operation.
1. Drafting sketch plan: the designer's image representation of the design concept of mahogany furniture, and fixing the prototype of the idea in the form of sketches. At present, freehand drawing and computer drawing are commonly used. >>>More
This friend, panel furniture does not need glue at all in the furniture making workshop, and glue is only used in the plate factory or plate workshop. >>>More
Introduction to the process flow of solid wood furniture 1. The general steps of product production; Preparation of materials, processing, molding, paint assembly, preparation: from logs to boards, etc. Including the cooking and sterilization of the wood, and then drying to about 8% 12% of the water content and water content before the oven can be used. >>>More
1. Cut down fresh logs; 2. Peel off the bark and remove the core of the pith; 3. Fiber crushing into high temperature disinfection and sterilization, and drying to 25% moisture content; 5. Add environmentally friendly resin glue catalyst (containing formaldehyde); 6. Paving tons of high pressure 200 degrees high temperature pat; 8. Plate windmill cooling; 9. Double-sided killing; 10. Plate anti-deformation and health preservation. The production process of layout furniture is: 1. Computer cutting; 2. Mechanical edge banding; 3. High-speed row drilling; 4. Mechanical forming; 5. Quality inspection; 6. Mechanical sanding; 7. Fill putty; 8. sealing and fixing the bottom; 9. Hand sanding; 10. Quality inspection again; 11. spraying primer; 12. Repeated grinding; 13. spraying topcoat; 14. Dust-free drying; 15. Quality inspection again; 16. a three-layer package; The whole process is scientific, rigorous and fully in line with international standards.
1. Computer cutting;
2. Mechanical edge banding; >>>More