-
Anonymous users2024-01-24The flush toilet relies on the impulse of the water rather than the suction, so the above situation is that the sewer pipe is blocked, and the impulse is reduced.
-
Anonymous users2024-01-23Reasons why the toilet suction is not enough:
1. The water level is not enough, the accessories are not properly installed, the allocation is not good, 2. The sewer pipe is blocked, or other problems.
3. The siphon pipe of the toilet is leaking, the flushing function of the toilet itself is not good, the punching is not standard, etc.
It would be much better to clean the toilet bowl dirt.
First pour vinegar essence, according to the amount of scale, if it is thicker, it is recommended to pour more, soak for half an hour to an hour, this method can remove scale, soften some impurities. >>>More
The main thing is that the base is uneven and not fixed, you can put some silicone, and you can fix it when it is dry.
There are two kinds of toilets, straight and siphon, you may be talking about siphon type, the suction power of this toilet is due to the siphon, the size of the siphon is affected by the pressure of the water surface and the structure of the pipe, if you can rule out other problems, it is likely to be the structure of the toilet backwater bend, resulting in poor siphon, so the pumping force of the toilet is naturally not large. You can ask a professional to come to the site to check it out.
You might as well try it all, or check if the drain tank is clogged.
Choose which drain to use, seal the other drain with a plugging material, put a sealing ring on the drain, glue the ground, fix the direction and make a circle of glue around the toilet.