-
Anonymous users2024-01-24Look at the outer ring, it is the white part, there should be a card slot or screw near the roof, I think this lamp should be removed from the white part first, and the transparent cover should be stuck by the white outer ring.
-
Anonymous users2024-01-23Pull it down with a screwdriver.
-
Anonymous users2024-01-22If you can install it, you will definitely be able to remove it, and the installer will not be stupid enough to stick to it for you, try to disassemble the whole piece.
Your projective lenses should be made of plastic, and they should be only a little larger than the frame. You hold one side of it up, try to push it towards the light box, for example, in the upper right corner; At that point, the left side of the plastic sheet will be exposed. Snap it out of the frame and you can remove the whole piece. >>>More
This is a special 60 30 embedded lamp for integrated ceilings, pull down at the cross junction with a sharp slotted screwdriver, and then you can disassemble the integrated ceiling on the side of the lamp, and then disassemble the lamp.
Scrape lightly with the back of a hacksaw blade, or buy a lamp with a slightly larger chassis to cover it up.
You need to listen to whether it is the lamp holder or the switch, and where the sound indicates that the contact is poor.
It's hard to open it yourself.
can be made by the people in the light shop. >>>More