Why is the security door of Gujia locked and cannot be opened, and the key must be used

Updated on Security door 2024-07-26
3 answers
  1. Anonymous users2024-01-24

    Do you use a double fast lock door? 1;If you remove the handle first [there are two screws on the inner handle of the door], see if the square pin inside is plugged in, if it is plugged in, otherwise you can't fix it yourself. 2;If it is a mechanical lock, it may be that the pin in the handle is short, insert or change the pin, and remove it as above.

  2. Anonymous users2024-01-23

    There are several situations when the handle is pulled down and the deadbolt does not return (the door cannot be opened).

    1. The pin under the handle handle is not installed or not installed.

    2. The spring of the pin under the handle handle is broken.

    3. The pin under the handle handle is too short.

    4. The lock is broken (worst-case scenario).

  3. Anonymous users2024-01-22

    Ours is also this Gujia security door can not be opened in the house after it is locked! The lock is broken! People are in there! The door is unlocked, and it is only when it is broken that you go outside!

Related questions
2 answers2024-07-26

The structure of the reducer output depends on the load, the unknown and fixed mode of the parts on the shaft, and the type and size of the bearing. Factors such as manufacturing and assembly process and installation conditions, the structure of the shaft, should make the shaft stress reasonable, avoid or reduce stress concentration, have good manufacturability, and make the parts on the shaft reliable positioning, easy to assemble and disassemble. >>>More

2 answers2024-07-26

If you can open it, it's not called an security door!

2 answers2024-07-26

Generally, because the weather is humid and rusty, some lubricating oil is fine.

2 answers2024-07-26

If it is a part of the key, it may be a problem with the key. If it's all like this, it's not like there's a problem with the lock when you look at it

3 answers2024-07-26

There may be two reasons for the difficulty of unlocking, one is the lock cylinder (poor lubrication, treatment: use a pencil foam to put on the key and then insert it into the lock cylinder and plug it back and forth), one is the lock point (the lock body lock point and the side lock point, this needs to be checked, if the side lock point is not sensitive, it will also lead to difficult unlocking. )