What to pay attention to in the kitchen and bathroom during the home inspection

Updated on Kitchen 2024-07-26
2 answers
  1. Anonymous users2024-01-24

    The kitchen roof, floor, wall, etc. are horizontal and vertical, and the ground should be tested for water (whether there is leakage), whether the flue is intact (flue mouth direction), standard (thickness). The water test of the bathroom (whether there is leakage) the horizontal verticality of the roof, floor, wall, etc., as well as the treatment of the moisture-proof layer of the kitchen and bathroom, whether the electrical switches, sockets, wiring, lighting, etc. are normal, and whether the floor drain, sewer pipe, and road (including the terrace) are blocked

  2. Anonymous users2024-01-23

    The kitchen and bathroom should be inspected for 24-hour water storage test;

    Referring to the "Code for Acceptance of Construction Quality of Building Ground Engineering" (GB50209-2010), the waterproof isolation layer should be inspected by the water storage method, the water storage depth shall not be less than 10mm, and the water storage time shall not be less than 24h; The surface layer of the building floor with waterproof requirements should be inspected by water-repellent method.

    Water splashing is used to check whether the surface layer of the ground with waterproof requirements has cracks, damages and other defects.

    It is recommended that you go to the top surface of the bathroom on the next floor to check, especially at the junction between the water pipe and the cast-in-place board, and check whether there is leakage. Judging from your statement, your bathroom should not be waterproof on the surface, and the water in your bathroom is the normal absorption of mortar. If there is no water for 1 hour, it means that the water you put does not meet the requirements of the water storage height, and you may only put a small amount of water.

    It is recommended that you fill the ground with water, and the water storage depth should not be less than 10mm according to the requirements of the code.

Related questions
What should I pay attention to when decorating the bathroom?
6 answers2024-07-26

Separate toilets include, for example, the most basic dry and wet separation, and the triple or even quadruple separation that has been upgraded in recent years.

What should I pay attention to when buying a bathroom basin?
6 answers2024-07-26

There are three major elements to pay attention to in the purchase of bathroom basins: 1Style: The traditional basin is divided into table type and column type, and the two extend out of many types, such as the table basin is divided into countertop basin, semi-entry countertop basin, undercounter basin, etc., and the column type is divided into half column basin, column basin, etc. >>>More

How to accept the waterproofing of the kitchen and bathroom during renovation?
7 answers2024-07-26

Detect whether the waterproof construction of the bathroom is in place, and focus on the inspection from the following aspects: >>>More

If water seepage is found in the bathroom during the inspection of the rough room, can I refuse to h
1 answers2024-07-26

Hello, Apple decoration for you to answer questions, this situation to ask the developer to rectify, water leakage is not a small problem, it is very troublesome to deal with it badly!

What should be paid attention to in the decoration of the kitchen and bathroom
7 answers2024-07-26

The wire joints in the bathroom must be hung with tin, and waterproof adhesive tape and insulating tape should be wrapped successively to ensure safety. The wire body must be covered with flame retardant pipes, and all switches and plugs should have moisture-proof boxes, and their positions must be determined according to the size and position of the electrical appliances to ensure that the use is convenient and reasonable.