-
Anonymous users2024-01-24Flat with the ground, high is not good, the installation will be removed, but it must not be lower than the ground, otherwise after the installation, it will leak during use, and it is not easy to maintain.
-
Anonymous users2024-01-23As long as there are conditions, it is best to install the sewer pipe 2-5cm higher than the finished surface of the ground.
The so-called condition is that the toilet outlet is recessed around the outlet, and the sewer pipe can be sleeved, so that the water will not splash on the tile when the water is discharged, reducing the probability of leakage and dirty water seeping out along the tile joint.
-
Anonymous users2024-01-22To be high, it is necessary to put the water from the toilet into the sewer pipe just to prevent it from overflowing when flushing.
The toilet model is not the same, and the height of the new one is generally about 5 cm. If it is not suitable to leave high first, it can be cut.
1. Not necessarily.
2. The flush toilet has a drain device. >>>More
The drain pipe of the toilet can also be clogged, mainly because you can't put something like a towel inside the toilet. After it is blocked, you can buy well, the kind of artifact that opens the toilet to dredge, or you can find a professional master to come and help you dredge.
You can stick a pipe under the toilet, as for how to stick it can be done by the bricklayer, so that when you install the toilet, insert the pipe into the sewer pipe, and it will not leak, which is how my family does, which is very good.
Of course, good water pipes are thick and have a long life, while bad water pipes are thin and have a short life.