-
Anonymous users2024-01-24You have to turn on the handle of the shower faucet on the side of the hot water, and the water temperature will go up, and there will be some cold water coming out when you open it in the middle, so the water is not hot, right.
-
Anonymous users2024-01-23Depending on your hot water source, it should be close to the kitchen and far away from the bathroom, and if you want to solve the problem, you can only add a heat source in the bathroom: the water heater can be used from time to time, although there is hot water from time to time.
-
Anonymous users2024-01-22The landlord's problem should be that there is a distance between the water heater and the bathroom, and the hot water from the water heater or the key state comes out of the bathroom through the pipe, and the water becomes hot when the water is dissipated during this time. If you don't modify the heating system, you can only wait for the water to sit for a while before the temperature can be maintained. The landlord can put some water in front of him first, which is used to wash clothes or something, hehe.
-
Anonymous users2024-01-21When releasing the warm water, feel the hot water pipe to see if it is about the same temperature as the kitchen, and if the water pipe is not hot, look for it from the pipe. The water combustion differential pipe is hot, and it should be that the mixing valve is blocked or the valve core is broken.
-
Anonymous users2024-01-20You change the faucet in your kitchen or clean it down. It's OK The hot water in the kitchen is definitely not as big as in the bathroom.
-
Anonymous users2024-01-19When releasing the warm water, feel the hot water pipe to see if it is about the same temperature as the kitchen, and if the water pipe is not hot, look for it from the pipe.
The water pipe is hot, it should be that the mixing valve is blocked or the valve core is broken.
It should be that the pipeline is far away, the water pressure is small, the flow of water can not reach, the linkage valve can not be opened, see if the water pressure is small, open the total valve a little bigger, the cold water pressure is large enough, then close the water inlet valve, open the connecting pipe to see if the filter screen at the water inlet of the water heater has impurities to block the water flow, and there is also a filter screen at the inlet nozzle of the mixed faucet.
Yes, but don't use boiling water.
When the water temperature is lowered or turned off, the hot water flow is too small, and the instantaneous water heater will automatically turn off. >>>More
If you use hot water frequently, it is recommended to use electricity, 1. Use instant heating type. , this power consumption is a bit large. >>>More
The line pipe needs to cross the wall, if it is obvious that it is not a big problem, it is ugly, if it is buried it will destroy the premise structure, it is not worth it, it should be vertically walked to the roof and then connected horizontally.