-
Anonymous users2024-01-24First, fix the light steel keel or wooden keel, adjust the level, and connect the gypsum board to the keel with self-tapping screws, and the gypsum board can be cut out according to the size required by the ceiling. I hope my answer can help you.
-
Anonymous users2024-01-23It is necessary to use a special self-tapping nail for gypsum board. The self-tapping nail has a spiral contact surface, and the contact area is large and spiral-shaped, and it is firm. The nail head is small, flat, and the pull-up force and friction force are small, which is absolutely undesirable.
I am Taishan Gypsum Co., Ltd., I hope it will be helpful to you.
The self-tapping screw is screwed on the keel, and the air gun is not firmly hit.
You think about whether there can be a starry pattern at the crack. >>>More
No, it is generally a spring-line, cut into pieces, and then brushed with glue and screws fixed to the top.
Cracks are inevitable, the splicing is almost all cracked, and it is better to use a whole board next time. The method is as follows: mix white latex or polyethylene glue with gypsum powder, but now there are anti-cracking sales that do not need to be adjusted, and the price is relatively high. >>>More
Yes, but the joints must be soldered firmly. There will be no condensation. Because most of the time, the temperature of the water pipe is not too different from the ambient temperature, and no condensation will be generated.