-
Anonymous users2024-01-24No, you can find a professional master to remove the glass, and then separate the double glass, wipe it dry, resynthesize the double glass, and then install it.
-
Anonymous users2024-01-23Are you saying that there is moisture between the glasses? In general, this phenomenon is more troublesome, because the glass is not tightly sealed when sealing, contact the property or decoration company, or the person who seals the balcony, to see if the glass can be split and then sealed, if not, you can only change the glass.
-
Anonymous users2024-01-22Can't drill, the glass is tempered and all broken by a drill. After the water inside is dry, remove the glass, apply silicone sealant around the glass and press it again.
-
Anonymous users2024-01-21Don't do this, find a professional to deal with it, remove the glass, process it into insulating glass OK, the price should be in the square.
-
Anonymous users2024-01-20Remove the glass, drill two holes on the upper and lower black rubber strips, put water below, ventilate above, and then install it.
Plastic steel profile refers to the PVC profile used for making doors and windows, which has appeared in Germany as early as the end of the fifties of the 20th century, and China began to introduce it in 1983 and began to be widely used at the end of the 90s of the 20th century. Because the strength of the doors and windows processed by PVC profiles is not enough, steel is usually added to the cavity to enhance the firmness of the doors and windows, so the plastic doors and windows made of steel inside the profile are usually called plastic steel doors and windows. With the widespread use of plastic steel doors and windows, the PVC profiles used to make plastic steel doors and windows are commonly called plastic steel profiles.
The plastic steel window glass on the balcony can be patched with plastic glue on the outside. >>>More
This is a natural phenomenon caused by the change of temperature difference between indoor and outdoor. As long as the windows are opened for ventilation, the indoor and outdoor temperatures are consistent, and there are no water droplets. >>>More
This phenomenon, there are generally two situations, one is that the plastic steel window is not strict, and it needs to be replaced, or the anti-friction strip inside is replaced to increase the tightness, and the other is that the wall next to the window is too large, and there is a gap between the wall and the window frame, in this case, it must be filled with cement first, and then a layer of waterproof plaster should be smeared. >>>More
1 Insufficient verticality of the installation, as well as uneven leveling, will also cause the fan to automatically move inward or outward. If the fitting is a hinge, it is recommended to add a wind brace under the fan, if the installation is a four-chain rod, use a screwdriver to tighten the screws of the slider on the four-chain rod.