-
Anonymous users2024-01-24Kitchen sink size.
1. The length of the double groove of the general family is 750 770mm, and the width is 400 420mm. The smaller kitchen can be fitted with a single trough with a length of 420 450 mm and a width of 320 350 mm.
2. The conventional countertop is 600mm deep (the depth of the cabinet is the depth of the countertop minus 20 or 30mm), so that there is no loss of materials, and it meets the installation size of the basin and stove! The kitchen area of individual residences is relatively small, and it can be appropriately reduced;
Because the size of the stove and the basin are not exactly the same size, so if the kitchen area is large enough, then don't worry, the normal depth of 600mm is fine.
Kitchen sink installation.
1. The installation of the sink type of countertop basin is relatively simple, just open the hole in the predetermined position of the countertop according to the installation drawing, and then place the basin in the hole, and fill the gap with glass glue, and the water on the countertop will not flow down the gap when used, so it is used more in the family.
2. If the kitchen area is relatively small, then when choosing a basin and stove, you should choose a smaller depth, here you have to pay attention to the minimum depth of the countertop generally to extend out of the cabinet 20mm, the size of the cabinet installation basin and stove should also remove the back plate and door panel, so, whether it is to find a special custom cabinet business or carpenter, be sure to communicate with the designer or carpenter, so as not to install inappropriately, causing unnecessary trouble.
-
Anonymous users2024-01-23There are many sizes and specifications of stainless steel washing basins, generally the size of double basins is about 750-850, and the size of small single basins is about 400-650. Large single pots are between 650-750. The choice of size is mainly based on the size of the cabinets and the kitchen space.
Note that the width of the sink should be between 450 and 500mm, because the width of the corresponding kitchen countertop is generally between 550 and 650mm, after all, the installation of the faucet and the position of the cabinet flange remains, so the width needs to be reserved at least 100 to 150mm of space. The depth of the sink should be greater than 200mm, which can prevent splashing. And the thickness of the sink should be moderate, 0 8 1 2mm is appropriate, too thin will affect the strength of the sink, too thick will affect the washing effect.
Kitchen sink.
Kitchen cabinets are based on the size of the house, generally 80 square meters of house kitchens are mostly about 5 square meters, 120 square meters of house kitchens are mostly 8 square meters, so theoretically the house is larger and the cabinets are larger, of course, there are many exceptions, especially their own altered, the general house, the cabinet has 4 to 5 meters long, and the height is basically to the meter
600X600 or 800X800 is more mainstream, and choose brand tiles such as Venetian merchant tiles, Angels, Milara, peak and other large manufacturers of ceramic tiles.
There are generally three standard sizes of kitchen sinks, single sink, double sink, and triple sink. Of course, the size of different models is not the same, but in general, the size of the stainless steel sink is relatively standard, and the general size is that the single tank is 60*45cm and 50*40cm is relatively small; The size of the double groove is generally 88*48cm and 81*47cm, which is more common; The three grooves are generally 97*48cm and 103*50cm, which are more common.
Kitchen floor tiles are generally 300*300.
Wall tiles are generally more 300*450. >>>More
The size of the chandelier in the living room is often closely related to the area of the living room. For larger living rooms, if the area is more than 30 square meters, you can use those chandeliers with more complex shapes and diameters of about one meter, which will make the living room appear atmospheric and high-quality while ensuring adequate lighting.