-
Anonymous users2024-01-24Do not put electroplated furniture in a damp place, and do not wipe electroplated furniture with a damp cloth. When washing the surface of the electroplated chair or sofa with soapy water or laundry detergent water, try not to wet the metal plated parts. Otherwise, the plating and lacquer parts are prone to peeling and rusting.
When it is found that yellow-brown reticulated spots appear on the surface of the electroplating parts, you can use neutral engine oil to rub them frequently to prevent the reticulated spots from expanding and causing the electroplating lead to degrade and rust only the protective layer. Rusted electroplated furniture should be derusted in time, but do not use sandpaper to polish the hall. Small parts can be soaked overnight in a basin with organic oil, and large parts can be applied to the rust with a brush or cotton yarn dipped in engine oil, and the rust can be removed by wiping back and forth several times after a while.
Usually coating the electroplating parts with anti-rust agent can play a role in rust prevention.
-
Anonymous users2024-01-23Do not put electroplated furniture in a damp place, and do not wipe electroplated furniture with a damp cloth. When washing the surface of the plated folding chair or sofa with soapy water or laundry detergent water, try not to wet the metal plated parts. Otherwise, the plating and lacquer parts are prone to peeling and rusting.
When yellow-brown reticulated spots appear on the surface of electroplating parts, you can use neutral engine oil to rub them frequently to prevent the reticulated spots from expanding and degrading the plating protective layer from rusting. Rusted electroplated furniture should be derusted in time, but do not use sandpaper. Small parts can be soaked overnight in a basin with organic oil, and large parts can be applied to the rust with a brush or cotton yarn dipped in engine oil, and the rust can be removed by wiping back and forth several times after a while.
Usually coating the electroplating parts with anti-rust agent can play a role in rust prevention.
-
Anonymous users2024-01-22There's nothing you can do, just try to use a rag to see if you can plug it in, and if you can't do it, it's recommended to re-coat it.
Rusty sofa legs are a common problem in the home, especially in humid climates. If not treated in time, it will lead to the appearance of the sofa legs being damaged, affecting the aesthetics of the entire home. Here are a few ways to fix it: >>>More
Carefully sand with fine sandpaper, then wipe it off with a rag dipped in gasoline, reapply the paint, and you're done.
Brush the paint and rust that is caused by the rust on the surface of the railing is not cleaned or the paint layer is too thin, you can use the angle grinder to install the wire grinding head in the rusty place to carefully polish, the rust is completely removed, and then the original paint surface is polished again, which is conducive to the bonding of the paint layer, and finally the paint is brushed, first brush a layer of anti-rust paint, and then brush other colors of paint, the paint can be brushed several times, the best paint is silver powder paint or 685 paint, these two paints are better waterproof, and not afraid of the sun, but the price is higher than ordinary paint.
Where is the rust?
1. If it is rusty in the lower gear, it can be cleaned with asphalt cleaning agent or banana water. >>>More
When metal furniture is rusted, it is necessary to avoid metal furniture being exposed to direct sunlight to prevent oxidation and deterioration of the metal or surface paint fading and dry cracking and peeling. During the cleaning process, it is best not to wipe the surface directly with a damp cloth, it is best to choose a cotton cloth dipped in a mild detergent and wipe gently. For dust in the depressions, you can use a fine soft wool brush to brush it off along the gaps. >>>More