How to choose parquet

Choosing parquet requires consideration from several aspects.

1.Specification. THERE ARE TWO COMMON FLOOR SIZES ON THE MARKET: A LENGTH 900MM X WIDTH 120MM X THICKNESS 12MM-15MM THICKNESS OF THE SURFACE PLATE.

B. LENGTH 1860MMX WIDTH 189MMX THICKNESS 15MM-20MM THICKNESS TABLE PLATE THICKNESS 3MM-6MM

The first is the most common specification in the domestic market. The second type is mainly the specification of export processing.

There is a space ratio between the size of the house and the specifications of the floor, if your house is smaller, it is recommended to choose a length of 900 x width of 120. This is more coordinated and delicate. If the space is large, you can consider 1860X189.

Texture, atmosphere. This is similar to the height of a person and the size of a shoe.

2.Quality. The choice of parquet environmental protection level should be the first place.

Parquet is divided into three layers of solid wood and multiple layers of solid wood. Both are processed and made from natural wood. It is not the number of flooring layers that determines the environmental level, but the quality grade of the adhesive used in production.

Formal enterprises, especially those specializing in export processing, have very strict requirements for the quality of rubber, and basically adopt internationally renowned brands, such as Finland-Tyre.

Methods of identifying quality:

Look at the substrate: a good floor substrate is clearly layered, no impurities, no decay, smooth and clean standard, no peculiar smell. On the contrary, the level is vague, impurities such as bark can be seen, and there is a formaldehyde smell when smelling.

Look at the process: ground assembly, check whether the tongue and groove are tightly fitted, and whether there are large and small heads.

Look at the paint: good paint is full, smooth and neat. On the contrary, the paint surface is thin, with missing coating, bubbles, etc.

It's not difficult to identify flooring, it just takes a little time and care. It's worth it.

Because a lot of mistakes are made in a hurry and carelessness.

1. The amount of formaldehyde released shall not be greater than that stipulated by the state; 2. No flaws in the pattern; 3. Choose satisfactory after-sales service; 4. Quality, price and service are considered comprehensively; 5. The invoice contract should indicate the material, specification, quantity, price and amount of the floor;

6. Pre-shop acceptance, consistent with the purchase; 7. Whoever buys the shop, the responsibility is clear; 8. Pay attention to daily maintenance.

Parquet is generally divided into three-layer solid wood and multi-layer solid wood. The price of three-layer solid wood is higher than that of multi-layer solid wood, the general skin has a ,,,, the cost of skin thickness is high, followed by the glue used, some manufacturers say no formaldehyde, I personally feel untrustworthy, as long as there is glue there will be formaldehyde, the landlord above said very right, Finland Tyre glue is also called non-aldehyde glue, the general regular point of the factory and the factory that has to do exports are to do this glue, the formaldehyde content of the products made of this glue is very small, you can use it with confidence.

According to the floor and hobbies, the buckle parquet is selected, with small gaps and firmness.

Lamett can provide you with flooring that is both environmentally friendly and aesthetically pleasing.