-
Anonymous users2024-01-24According to your description, I will give you a reference: the water from washing the cement bucket is poured into the squatting pit, and it is possible that the cement has formed a lump in the sewer pipe, depending on how you ask someone to deal with it. The best way to deal with it is to go downstairs and uncover all the ceilings of his house, and unscrew the lid of the inlet in the sewer to remove all the accumulation inside, of course, this method will be very troublesome and affect the lives of others.
Now that you have found someone to dredge it and it is no longer leaking, then you will look at it again after a while, because the squatting pit outlet is actually located on the nozzle of the sewer, and it will inevitably overflow to the sewer nozzle if it is blocked, but there is one point, the waterproofing of the house is generally done very well, even if the leakage of your own bathroom will not soon penetrate downstairs!
It is recommended that you look at it after a while, if it is still blocked or leaking, clean up the debris in the pipe thoroughly, and then reinstall your own squatting pit, and make the waterproof layer of your bathroom again, especially around the sewer pipe.
-
Anonymous users2024-01-23Listen to what you said is from the sewer pipe around a circle began to drip water, that is the hanging mold secondary pouring concrete is not done, a long time will still leak, this is a big problem, you squatting pit up, in the sewer pipe around the concrete hair, buy a bag to plug the leak king, about 10 yuan or so, with water brush along the sewer pipe around the concrete evenly painted, the range of brush is larger, this is a quality problem, you can also find a developer to repair.
-
Anonymous users2024-01-22There is no need to use glass glue or plug leaks.
First seal the floor drain and the place where the water is drained. Generally, the height of the water seal may not be enough.
How many workers? It's nothing if there are fewer people. It's commonplace, you have a good heart, and people will help you do things better, just small things. Relax your mind.
It's normal to not get a good repair. Not reworking will affect your life later.
Start by identifying where the water is leaking. If it is only a joint leakage, under the premise that the quality of the pipe is qualified, the joint can be replaced or a leak-proof sealing tape and AB sealant can be added to the joint; If the quality of the pipe is not good, the pipe should be replaced. You can also apply the adjusted AB glue in the leaking place, and then wrap a layer of ribbon on it, so that the ribbon is soaked with AB glue and then apply a layer of AB glue on the ribbon, and the whole process can be divided into two or many times.
Nothing is useful. Why don't you look at where the water is coming from and patch the seams in the bathroom.