Is it better to contact the whole piece of leather sofa or to splice small pieces

If it's all high-quality products, it must be a good whole. But the price will be very expensive!

If it is a general product, each has its own characteristics. The stitching can be the best part of the cowhide, while the whole piece of cowhide can be flawed!

It depends on personal preference!

The identification method is as follows: knowledge of dermal identification.

1: Identify the dermis.

Hand touch: that is, touch the leather surface with your hands, if there is a smooth, soft, plump, elastic feeling is leather; However, the general artificial synthetic leather surface is astringent, rigid and has poor softness.

See: the leather surface has a clearer hair, pattern, yellow cowhide has a more symmetrical fine pores, yak leather has coarser and sparse pores, goatskin has fish scale pores.

Smell: All genuine leather has the smell of leather; Artificial leather has a strong pungent plastic smell.

Ignition: Tear off a little fiber from the back of real leather and artificial leather, after ignition, where it emits a pungent smell and forms a pimple, it is artificial leather; Anything that smells like hair and doesn't have hard bumps is dermis.

2. Identify artificial leather and synthetic leather.

With the above four basic identification methods, it is obvious to compare and identify artificial leather and synthetic leather. In addition, artificial leather and synthetic leather also have the following characteristics:

1. Press the leather surface with your fingers, there are no obvious pore wrinkles, if there are wrinkles after pressing, it will not disappear obviously.

2. There are no pores on the leather surface, which is an important feature to distinguish the authenticity of leather.

3. Cut off the corners and burn, smelly, but not the burnt smell of hair.

Generally, low-end products will be spliced in small pieces, because the cutting rate is increased, the loss is reduced, or the billet grade is too low, and there are too many defects to cut large pieces. Small piece splicing is difficult to clean the garbage in the seam due to the difficulty of the splicing position, the stiffness of the splicing position affects the comfort, the stiff position of the splicing position is small, the stress area is small, and it is easy to wear and tear, and "falling blue" is its inevitable disadvantage. Just because of the cost saving, the sofas that are generally spliced are low-end goods with low positioning, so there will be no slightly higher pursuit of production technology and sitting feeling (except for high-end American and European-style pull points)!

If you have money, you can choose a large piece of enjoyment, and if you don't have money, you can choose a small piece of splicing to force yourself to accept! Durability and comfort are the victory of the whole piece, because good leather can cut the big board, and the poor skin can't cut the big board because there are too many flaws! Think with your brain and feel with your heart!

Don't listen to the shopping guide fooling you don't understand!

Dear, hello, if the whole piece has been, the contact surface is easy to deform and loosen, such as a small piece of splicing together the stressed surface is not so large, so it is not easy to loosen and deform, I hope it can help you, Zhibao furniture.