How to design a circuit socket in the kitchen

Updated on Kitchen 2024-07-23
1 answers
  1. Anonymous users2024-01-24

    One above the range hood, one below the gas stove, one under the sink, one with five holes next to the window, and all the top of the empty countertop are with five holes, four to eight, according to the size of your countertop.

Related questions
2 answers2024-07-23

There are many electrical appliances in the kitchen, including refrigerators, electric cookers, rice cookers, electric ovens, microwave ovens, electric water heaters, induction cookers, Mickey cookers, electric woks, etc. Regardless of whether you have it now or not, you should reserve some power sockets, and you will not think there is no socket when you use it in the future, because there are many electrical equipment, then the wires laid should be thicker, it is best to choose 4 square wires, of course, there should be a special air switch on the switch box at the entrance of your home to control the socket line of the kitchen, such as the vacant position in the switch box, and then put a leakage protector to control the socket power supply of the kitchen together with this air switch. The lighting wiring in the kitchen should be laid separately from the socket wiring.

1 answers2024-07-23

Steamers, ovens, microwave ovens, rice cookers, juice makers, soybean milk machines and other equipment should be taken into account, and the height is about and so. The height of the refrigerator socket is high, the height of the gas meter fume hood needs the socket, and the height of the power supply of the disinfection cabinet. The height of the power supply of the gas water heater or electric water heater. >>>More

2 answers2024-07-23

1. The socket and the Zhihe section lighting line are divided. >>>More

1 answers2024-07-23

Remove the socket, wrap the wire head with insulating tape, and then put a small plastic bag on it, and tie it firmly with tape.

7 answers2024-07-23

The sound of boiling water when the socket is connected to the power supply indicates that the socket is in poor contact with the plug, and there is a slight ignition. It is recommended to replace the socket so that it maintains good electrical contact with the plug.