What to do if the toilet drain pipe is short

Make a circle of embankment with a little cement on the floor tile of the nozzle (5 mm higher than the floor tile), when installing the toilet, try to align the water outlet of the toilet with the center of the nozzle (to be a concentric circle), so that because the water outlet of the toilet (75 mm) is larger than the nozzle (110 mm), it is difficult for the water of the toilet to flow outside the pipe.

What to do if the toilet sewer pipe is lower than the ground, 1. If your original toilet drain pipe is not very far from the ground finish, such as 2 4 cm, you can directly add a toilet shifter, which is enough to get it. 2. If it is too far from the ground, consider the direct joint, generally the direct joint with a diameter of 110 pipes, the height of which is more than 10 cm, should allow you to not connect other pipes, just put it on the toilet. 3. If the distance between you is too much, you can only connect the direct connection on the shelf and then connect a section of Shanran 110 pipe. >>>More

Is it a toilet or a plumbing? The water pipe can be made of stone glue or sealant, and then dry for 24 hours after plastering, and then use water, which can generally be blocked, and there is no pressure on the water.

If it is a leakage pipe, you can directly paste a little water pipe glue, at most 20 yuan, if it is a hidden pipe leakage, it will be a tragedy, and you have to dig the floor and pry bricks to repair the water pipe.

Didn't understand where the steaming water is?

Is there water running in the urinal? It should be that the drain valve is not tightly sealed, and the drain valve should be debugged or replaced; >>>More