Can the aluminum gusset ceiling be turned?

This is OK, for the board, it can be processed into a circular arc, the corners are generally L-shaped, you can cut the corners with scissors in the outside place, bent into a circle, but this may cause the shape of the saw porcelain to be molded, if it is white or solid color, you can draw two arcs on the board, the angle of the arc is equal to the arc of the need to do a circle, the arc size is equal to the width of the corner, aluminum gusset is a special material, light and durable, is widely used in home decoration ceilings, with a variety of excellent characteristics, It is suitable for use in kitchens and bathrooms, and can not only achieve a good decorative effect, but also has a variety of functions, so it is very popular with consumers.

Yes, the board can be processed into a circular arc, the corners are generally L-shaped, you can cut the corners with scissors to leak the outside of the place, bent into a circle, but this may cause the shape of the saw porcelain to be molded, if it is white or solid color, you can draw two arcs on the board, the angle of the arc is equal to the arc of the need to do a circle, the arc size is equal to the width of the corner, aluminum buckle plate is a special material, light and durable, is widely used in home decoration ceilings, with a variety of excellent characteristics, It is suitable for use in kitchens and bathrooms, and can not only achieve a good decorative effect, but also has a variety of functions, so it is very popular with consumers.

Pay attention to the problem. Uneven ceiling: the suspender leveling is not serious when the main keel is installed, resulting in inconsistent elevation of each boom point; During construction, it should be operated carefully, check the tightness of each hanging point, and pull through the line to check whether the elevation and flatness meet the design requirements and specifications.

The local node structure of the light steel skeleton is unreasonable: the light steel skeleton of the ceiling should be set up according to the corresponding node structure on the drawings at the holes, lamp openings, vents, etc., so that the structure meets the requirements on the drawings and ensures the rigidity of the hanging.

The light steel skeleton is not firmly hoisted: the light steel skeleton of the roof should be hung on the main structure, and the boom nut should be tightened to control and fix the design elevation; The pipelines and equipment parts in the ceiling shall not be hoisted on the light steel skeleton.

The gap between the block of the cover panel is not straight: the specification of the cover panel is deviated and the installation is not correct; Pay attention to the plate specifications during construction, align the cable, and ensure that it is flat and straight when installing and fixing.

The seam strip and edge strip are not tight and straight: the specifications of the processed strip are inconsistent; When using, it should be selected, and the cable should be fixed and pressed after the operation is straightened.

The square aluminum alloy ceiling should pay attention to the color difference of the plate to prevent the quality of uneven color.

There is no problem at all, the integrated ceiling can be done arbitrarily!

Now the integrated ceiling has a retest roof, you can go to find it without customizing it yourself.