-
I can't do waterproofing! But the builder must have made the ground waterproof before the tiles, and it is unknown whether the wall was done or not. Generally speaking, you will also do it on the two walls inside your house, but it is relatively simple, and the external wall will not be done.
If you don't want to use the tiles that have been pasted before, pick up and re-paste them, buy a better waterproof one yourself, and do it several times, after all, rest assured, but you have to pay the money for smashing bricks and the money for secondary construction.
-
It is not good to do waterproofing after the tiles have been paved. The waterproofing materials usually used cannot form a waterproof layer through the tiles, and can only be waterproofed and inspected before the tiles are laid.
-
Generally, others have done waterproofing before sticking tiles, it is recommended to do a closed water test to see, if there is no leakage, there is no need to do waterproofing. It is basically useless to do waterproofing on the tile surface, and if it leaks, it is better to rework and redo it.
-
I can't do it anymore. If there is no leakage, it is best, and if there is a problem, cut all the tiles and do it again.
-
At this time, it is not possible to do waterproofing, unless all the tiles are removed.
-
To do waterproofing you have to gouge off the existing tiles.
You have to make sure that the bathroom is not a load-bearing wall, or move it out a little, it is estimated that your suite should be almost load-bearing, the bathroom should not be too small, it is best not to move it casually, you still actually find a designer.
You should have such a service on 58.com, but you have to know, don't be deceived, and beware of bad guys. >>>More
1. All the previous bathroom tile colors seem to be monotonous white, monotonous white is easy to make people visually fatigued, so now many people choose to decorate the bathroom with a variety of color tiles when decorating the bathroom, but when a variety of colors are matched, you need to grasp a certain color matching skills, otherwise it will be self-defeating. >>>More
Bathroom wall tiles Actual perimeter X actual height (height is the ground backfill, and the calculation starts after hanging the aluminum gusset) = wall area. Finally, subtract the area of the door and window openings from the wall area to get your actual bathroom wall area. The kitchen wall tiles are calculated as well as those of the bathroom, but there are 2 places to pay attention to in the kitchen, first, the cabinets: >>>More
Bathroom exterior window design dimensions.
The bathroom is a very private place and needs better lighting, so the window sill of the bathroom is about 130 cm to 150 cm high, and the window sash is hung up, so that the window can not only be opened for ventilation, but also protect privacy. >>>More