How to do waterproof in the bathroom?

Bathroom waterproofing, generally we will directly recommend the use of mortar waterproofing agent, not only with the base surface sticky firm, but also high puncture resistance can be with the same life as the building, the use of the method.

1.Clean the construction site and sprinkle water to make it fully moist but there should be no stagnant water.

2.Wall: The total thickness of the waterproof layer (waterproof mortar + waterproof mortar) is not less than 10 mm for the wall, not less than 20 mm for the ground, and not less than 1800 mm for height.

1) Mix "Lauyer mortar waterproofing agent" with cement at 1:3 to form a waterproof mortar, and paint it once or twice on the base surface, with a total thickness of 2 mm.

2) After 20 minutes, after the waterproof mortar is dry, stir it into a waterproof mortar with "Laoyal" and cement and sand according to 1:2:6, and wipe it on the surface of the waterproof plain ash with a thickness of 8 mm.

3) After the waterproof mortar layer is solidified within 24 hours, it is sprinkled with water for curing.

Make a rigid waterproof layer (cement mortar waterproof layer). Roll up 250.

Then make an elastic waterproof layer, (acrylic acid waterproof coating). Roll up 100.

Then make a protective layer of cement mortar.

At the shower wall, do 1500 high rigidity waterproofing, which can be brushed with plain cement waterproof slurry.

Buy cement-based materials, make the floor and wall all waterproof, and do it two to three times according to the material requirements.