How to remove the dirt attached to the wall tiles of the bathroom due to long term bath splashing?

It's very simple, and I've done it myself a lot. Here's how:

1: Move the induction cooker to the bathroom and place it, plug in the electricity (gas stove is also OK) 2: Put appropriate water into the pot, put the induction cooker on high heat and boil.

3: Close the doors and windows of the bathroom (pay attention to more water, at least enough to cook for 10-20 minutes, otherwise it will be boiled dry, and if it is not safe to use gas, open the door for ventilation after cooking and then go in).

4: After steaming for about 20 minutes, you can start cleaning.

5) Add detergent or dish soap to warm water and brush with a steel wool ball.

6: Rinse. 7: In order to prevent the regeneration of dirt in the future, apply pure dish soap after air drying, and wipe it with a dry cloth, so that the scale will not regenerate for a long time.

Our house is generally washed once a month, and each time it is washed like a newly renovated one.

If the dirt attached to the wall tiles of the bathroom due to long-term bath splashing, you can put the toilet cleaner used to clean the toilet into the watering can, or dilute it with hydrochloric acid or sulfuric acid to spray it on the tiles from top to bottom, and after 10 minutes, clean it with a brush.

How to remove dirt in the bathroom:

1. Tiles: Several rows of tiles near the ground wall are difficult to clean, and they are prone to yellow water alkali dirt, and even brushes are difficult to remove. At this time, you can put the toilet cleaner used to clean the toilet into a watering can, or dilute it with hydrochloric acid or sulfuric acid to spray it on the tile from top to bottom, and after 10 minutes, clean it with a brush.

2. Toilet: Don't underestimate the use of leftover soap heads, its role can not be ignored. You can make a small pocket with a piece of gauze or old stockings, and put the soap head in the tank that hangs tightly on the toilet.

When soap is dissolved in water, it can be used to clean the toilet. As for the outside base of the toilet, which is easy for ordinary people to ignore, it should be sprayed with detergent and rinsed with water, and finally, wipe it dry with a clean cloth to make it as white as new.

3. Mirror: The mirror in the bathroom will produce water mist and blur vision due to long-term humidity in a humid environment, and it is difficult to clean it with dry and wet towels. You can apply a layer of soap to the mirror first, and then wipe it dry with a dry rag to restore the clarity of the mirror.

This method also applies to glass countertops, brackets and basins in the bathroom.

4. Faucet: The hard water sediment of the faucet can be eliminated by wiping with lemon slices.

5. Blocked nozzle: The shower nozzle will not be smooth after being used for a long time, usually because of the accumulation of scale. You can remove the nozzle, soak it in vinegar for two hours, and after removing it, use a toothbrush to brush off the softened limescale.

6. Corners of mold: If you don't want to see spots of green and black mold in the bathroom, the best thing to do is to spray the bathroom with diluted alcohol every week. In this way, it is easy to prevent mold.

If you find that mold spots have grown in the corners of the bathroom, you can also wipe them with a cotton ball dipped in an appropriate amount of alcohol.

These dirts are limescale, formed by mixed stains.

The use of toilet cleaner is an oxalic acid cleaning agent, which has a strong dissolving effect on scale and has a certain corrosiveness.

When using, be careful not to wear glue gloves in direct contact with your hands, and do not often use them on electroplating surfaces such as water nozzles and nozzles.

That kind of high-temperature pot is fake, don't believe it, try it with toilet soap, apply it to the wall, and let it corrode before washing.

Toilet detergent for washing toilets works well and is cheap.

The kind of high-temperature kettle that is directly sold by TV.