How to install the bathroom glass partition

Installation method of bathroom glass partition:

A: Lay floor tiles and wall tiles first, and pay attention to the errors on the top and bottom of the wall.

B: Install sewer pipes and floor drains before laying bricks.

C: The height of the sill stone is centimeter-2 cm to achieve the purpose of dry and wet partitioning.

Precautions for bathroom glass partitions.

1. After laying the floor tiles, make a sanitary partition wall.

Before laying floor tiles, you must install sewer pipes and floor drains, consider the error problems existing on the wall 2, and consider the water repellency of the door frame.

The threshold should be higher than the ground, otherwise it will cause inconvenience.

3. The side of the bathtub should be equipped with a hand lever.

In order to ensure safety, install a hand rod next to the bathtub, especially if there are elderly people and children at home4, and the electrical plug is far away from the bathtub.

5. Do a good job of moisture-proof measures for switching power supply.

In order to ensure safety, the use of wire-type switches, energized equipment, plus moisture-proof cover 6, glass doors should be made of organic or tempered glass.

Use organic or tempered glass to avoid damage.

With the continuous improvement of the living environment, more people are willing to choose a more comfortable and comfortable living space, as a bathroom closely related to people's lives, and the taste of life is constantly improving. How to design, in order to make the home more warm, through the bathroom decoration, for you to answer all kinds of problems in the process of home decoration.

First, material selection is the key.

Favorable materials are necessary conditions for decorating the home, and for the owner, it is necessary to have a general understanding of the current various decorative materials. For example, common glass partitions, frosted glass, etc., which materials are suitable for sanitary partitions, and what precautions are required for installation and maintenance of sanitary partitions, all of which need to be carefully considered.

Second, the essentials of bathroom installation.

1.Toilet package riser, the use of light steel keel + cement board or wood keel + cement board, practice has proved that this construction method of tile diagonal will not take a long time to crack.

2.The partition wall is very unstrong with light steel keel + gypsum board, and adults can kick through the partition wall with light steel keel + gypsum board with a little force! And it's not soundproof, the decibel number of farts is high, and the neighbors are really listening!

3.If you use red bricks and air bricks "bucket bricks" (bucket bricks can reduce the floor area) with 1 2 cement sand ash directly pasted with bricks, once formed, dry like a steel plate as strong, ten thousand years of prison, the diagonal of the tile will not crack, if you have money, you are willing to decorate it once a year! Refer to Option 1.

4.First do the bathroom floor waterproof and then brick, the riser will be waterproof to make a high point, more than 15cm, and then do a waterproof outside after the bricking, 30cm high.

5.The most important point is to leave the toilet as large as possible to ensure future maintenance.

Generally speaking, the bathroom is an indispensable part of everyone's life, and in the process of decoration, it is necessary to carefully complete every step, especially the waterproof and leak-proof equipment, and strengthen supervision and management, so as to make this home full of comfort and warmth.