The balcony made a wooden floor squeak, how to deal with the creaky sound

There is a way to completely eradicate it, re-tighten the dragon and reinstall the floor, which is really a headache and labor, and no one is willing to counterattack and reload. Only before installing the dragon and the floor, pay attention to the following processes and methods, the floor will not be silent:

1. Before installing the dragon, it is generally used to punch holes with a 12mm electric hammer bit, so the wooden tenon should be at least 18-20mm or more square wooden tenon tamping to be useful, and it can not be easily laid down, and the wooden tenon will dry and shrink after a few days;

2. The material of the wooden tenon of the rammed ground is harder than the material of the earth dragon, and the hard shrinkage force of the wood is small, and it is not easy for the earth dragon to pull up the wooden tenon elastic to maintain stability;

3. There is a room with a ground level difference of several centimeters, at this time, the carpenter master will pad some knife-shaped wooden stoppers or three splints under the dragon to ensure the level of the dragon, at this time, don't forget, between the dragons above the height of the dragons, it is necessary to fix each other with a short dragon, to prevent the dragons from swinging left and right, so as to ensure that the dragons are smooth and firm;

4. When installing solid wood floor drilling, the hole diameter must be smaller than the floor nail, so that the floor can eat nails;

5. Reserve more than 1 cm of floor shrinkage joints around the wall to avoid climate change or floor moisture content does not meet the expansion and arching, which most people know.

These skills may seem like small details, but the problem is often in the small details that people don't pay attention to. In fact, these node skills are an important factor in ensuring the quality of the floor.

It is not feasible to make a balcony as a floor cabinet, which has been researched for many years. There are many hidden ends in it, you should consider it.

As for the process production, the general carpentry can handle it. Not to be discussed.

There have been many such platforms built many years ago, but this is not very ideal.

First, the regional requirements are very high, and it is not suitable to be used in the high humidity areas in the south. Second, the situation in the northern region is better, but it is not absolutely feasible, depending on the floor, orientation, and ventilation of the room.

3. How to deal with the process of exterior wall and exterior window construction has a great impact on this platform. If the window frame chokes on water, this floor will be reimbursed.

Fourth, in daily application, no matter what form of door is used, the application is not ideal.

Fifth, the appearance of the effect, destroy the overall effect.

Sixth, from the perspective of customer backlash, most regret it.

It is recommended that it be given serious consideration.

Check where the nail is not firm, and then re-nail the nail where it is not firm.