How can I prevent water leaks in my bathroom?

If you want to prevent water leakage in the bathroom that has been renovated, you can do it on the surface of the tile to prevent water leakage, and the tile surface and tile joints are coated with Yijia colorless penetrating waterproofing agent, and the waterproof edge is made of plastic steel mud around the ground and around the pipe root. In this way, even if there is water on the ground, it will not seep under the tiles and will not have any effect on the waterproofing layer below. After this method is done, the surface of the tile does not have any effect.

Water seepage on the surface of the renovated bathroom tiles is the most common, and most of them seep down from the joints around the tile joints and the ground. Therefore, after repairing with the above method, the water can only flow away from the floor drain, and the water will never seep under the tiles again.

"Try not to damage the original waterproof layer. If the original waterproof layer is not damaged, there will generally be no leakage after moving in. However, the waterproof layer is easy to be damaged when renovating the ground, and if it is accidentally damaged, it should be repaired in time to avoid leaving hidden dangers.

Resurfacing floor tiles should be done to waterproof the floor.

If you need to replace the original floor tiles in the bathroom, after chiseling off the original floor tiles, you must first level the ground with cement mortar and then do waterproof treatment. Repeat 2 to 3 times with polyurethane waterproof paint. Be sure to do wall waterproofing.

Water splashes on adjacent walls during bathroom bathing, so be sure to waterproof the walls before laying wall tiles. Generally, the wall should be waterproofed with a height of 30 cm in waterproofing treatment, but for non-load-bearing light walls, the entire wall should be waterproofed, at least meter high. At the same time, pay attention to the waterproofing of the wall adjacent to the shower position should also be meters high.

The grooves of the water pipes in the wall should also be waterproofed. During the construction process, when pipelines and floor drains pass through the floor slab, the waterproof layer around the holes must be carefully constructed. The buried water pipe in the wall should be reasonably arranged, and the water pipe should be made with a groove larger than the pipe diameter, and the plastering in the groove should be smooth, and then the groove should be brushed with polyurethane waterproof coating.

24-hour "closed water test" acceptance waterproof; After the waterproofing project is completed, seal the door and the drain, fill the bathroom floor with water to reach a certain liquid level height, and make a mark, if the liquid level does not drop significantly within 24 hours, especially the roof of the downstairs house does not leak, the waterproof is qualified. "

First, the hydropower transformation is completed, and then the water is pressed and tested, and then the water is not leaked into a slurry and evenly brushed three times, pay attention! The water does not leak and solidifies quickly, and a small amount should be melted each time.

Now the delivery is generally done waterproof, but you had better do it again before decorating, now it is generally used polyurethane polypropylene cloth, when decorating the tile to be careful when the worker is careful, try not to put the tile on the waterproof so as not to pierce the tile corner waterproof.

Do a good job of waterproofing. It is better to do two layers. The inside is the outer layer.

The water pipes should be in good condition. If the water pipe leaks in the future, you can only knock on the floor. Leakage and mildew do not ask for people, do not plane, do not dismantle, the operation is simple to come by yourself!

Amazing Rich Construction is a professional consultant who provides solutions to water leakage and mold

It is recommended to use a new generation of nano waterproof material to solve the waterproof problem in 10 minutes, easily solve it without asking for people, and it can be operated by yourself, which is convenient and fast.

Choose the pipe to ensure the quality of the material;

Do a good job of pipeline pressure to ensure that there is no leakage;

Do a good job of waterproof treatment in the later stage to ensure that there is no leakage.

Check the waterproofing of the original ground when entering the house, and do a 24-hour waterproof and closed water test, no leakage; In the case of flat ground foundation, carry out construction, paint Oriental Yuhong's special waterproof material, and paint the cross hair two to three times; 24-hour closed water experiment.

When you first start decorating, you must do the waterproofing in place. Waterproof glue, tarpaulin, etc. can achieve good waterproofing.

Before you decorate, do a good job of waterproofing, which generally will not leak.

Bathroom waterproofing or to choose the right product, Jingwei waterproof, is a waterproof brand established for more than 20 years, CCTV brand through train waterproof cooperative enterprises. Among them, Jingwei 501 product is a leak-proof bathroom backfill, which can effectively solve the hidden danger of toilet leakage.

In the eyes of many renovation workers, the definition of waterproofing refers to the process of blocking water from one side to the other. Only with this function can the waterproof coating be called a qualified real waterproof coating.

Before the waterproof construction, we must do a good job in the base treatment of the wall, that is to say, we must ensure that the surface of the wall is not pulverized, and there is no peeling or bulging and other problems, to ensure that the wall is smooth and flat, and at the same time, it is necessary to ensure that the surface of the base must be free of dust, and the cleaning work must be done in place, and it is also necessary to ensure that there is no delinquency and stains that affect the bonding of the paint such as film release agent, which is one of the important conditions for waterproofing to be done, and it is also the premise.

First of all, brush the first waterproof coating, the cleanliness of the wall before construction is the most important, and the waterproof coating must be full, there must be no gaps, and it must be closely integrated with the base layer, and there must be no cracks or bubbles and fall off.

In addition, we must pay attention to the height of the waterproof coating brush must be consistent, that is to say, it can not be uneven, the thickness must at least meet the requirements of the product, otherwise it will not have the effect of waterproofing, the general dry area should be 30 cm waterproof, if it is in the shower area, it is best to achieve a height of more than 1 meter 8, so as to have a good waterproof effect, if you use a bathtub, then it is also a little higher than the bathtub.

After brushing the first time, you have to brush it for the second time, but you must wait until the first time you brush it, and then you can brush it a second time after it is dry, and then you need to lay a protective layer on the surface of the waterproof coating, and the coverage must be complete, and there can be no gaps or cracks.

Then carry out the closed water test, after the construction is completed, all the sewers in the bathroom are blocked, and then the closed water test is carried out, and the closed water test can be accepted, if it is not passed, it should be handed over to the decoration workers for rework.

1. Pay more attention to subtle places.

When buying bathroom furniture, we must pay attention to the small part of the humanized design, which is the key reason for the success or failure of the purchase of furniture.

Tips: When purchasing, you can not let go of the small part, furniture production is not professional, you can do it through the attention to detail, it is one of the ways to prevent water leakage.

Second, the internal space should not be ignored.

After a period of use, the floor under the sink cabinet begins to deform because the condensation droplets left by the pipes hidden inside the cabinet soak the furniture.

Third, the installation process should be in place.

When installing bathroom cabinets, it is often necessary to dig holes in the box board, and the multi-functional edge banding strip can tightly wrap the cutting edge of the board, which plays a good role in waterproof and moisture-proof and is a way to prevent water leakage.

In real life, it is impossible to completely remove the ubiquitous water droplets and water vapor after bathing every time. Backsheet veneer is not only waterproof, but also a protector who prolongs the life of furniture and a good way to prevent water leakage in the bathroom.

Fourth, the selection of plates is the key.

The box board accounts for the majority of the bathroom furniture, and if you want to buy good bathroom furniture, the main materials can not be sloppy.

Fifth, the back protection is very critical.

In the process of purchasing bathroom furniture, customers must pay attention to the details on the back. The use of double decorative veneer backplate can prevent the MDF substrate from being exposed to the outside, and water will no longer have a chance to enter the board from the back of the cabinet, which is a way to prevent water leakage in the bathroom.