-
Anonymous users2024-01-241.The corners of the furniture should be rounded. In case your child is injured by sharp corners while playing or in the event of a bump.
2.The size of the holes in the furniture should be in accordance with the regulations. The size of the gap or small hole is not standardized, and the child can easily get stuck in the finger or limb and cause pinching.
According to the relevant regulations on gaps and small holes in children's furniture, the diameter or gap of holes and gaps with a depth of more than 10mm should be between 6mm and 12mm; The gap between the moving parts accessible to the product should be between 5mm and 12mm.
3.Ventilation openings should be provided in closed furniture. When the enclosed space of the furniture can accommodate one child, it should be ventilated to eliminate the potential risk of suffocation.
4.The door cover mechanism of the furniture should not lock automatically, and the opening force should not be greater than 45N. In this way, if the child accidentally enters the furniture and is enclosed, it can still save itself.
5.Furniture raw materials should be environmentally friendly and healthy. For the surface coating of children's furniture, the state has detailed regulations on the composition of original decoration materials such as textile fabrics, leather, plastics, etc., and strictly controls the content of toxic and harmful substances such as formaldehyde, antimony, arsenic, barium, and chromium.
This is still necessary to install, after all, it hurts to bump into the heart, right, why the child grows up healthily. That's right.
Quickly distinguish between real and fake solid wood: all solid wood furniture has natural color differences, and there are differences in texture, and the appearance defects of solid wood veneer furniture are few, and its texture is clear and even better than that of all solid wood furniture. Looking at the scar knot is a good way to identify pure solid wood, look at the location of one side of the scar, and then look for the corresponding texture on the other side. >>>More
Generally, blockboard, large core board, MDF and particleboard contain more formaldehyde, which is a colorless irritating gas and is dazzling and pungent. If it is solid wood furniture, it contains less formaldehyde, and if it is painted, it contains more benzene. It has an irritating effect on the skin, eyes and upper respiratory tract.
The board has exposed places and generally volatilizes formaldehyde. Once covered by paint and seals, the chances of leakage are much smaller.
General hardware is good, the plate will not be bad, hardware including locks, connectors, rails, hinges, handles, etc. are more intuitive, you can first look at the surface of the plating, and then look at its details, the lock should be the easiest to see, you can pay attention to its key, whether it is a copper key, whether the surface plastic part is rough, etc.