-
Anonymous users2024-01-24Regardless of what kind of ceiling may crack, it depends on the crack in a few years, the single-layer gypsum board is easy to crack, but it is not impossible to maintain it for five or six years, otherwise how can there be so many home decoration tooling are used in gypsum board ceilings, if you can pursue not cracking, you can also use double-layered, hold longer, and now the decoration is generally considered to be redecorated after a few years, in the past few years, just look at the gypsum board ceiling to see tired, in the exchange for others, and there may not be cracked when you are tired of seeing, ha.
-
Anonymous users2024-01-23It must be easy to crack, and the gypsum board will be hot and cold in summer and winter, and there will be fine dust. Or choose the gusset, and the Fujiite integrated wall panel can also be suspended. You go to Sichuan Xinkey ornament online to see. It doesn't matter what we said, it's true that you have seen it yourself.
-
Anonymous users2024-01-22Double layer would be fine.
Monolayer is definitely cracked.
-
Anonymous users2024-01-21It's hard to say, just don't get too wet.
Of course it's not normal.
Drywall ceilings high-rise cracks. >>>More
Fill the seams of the gypsum board with caulk, smooth the seams, attach the seam tape, and compact until the caulking paste presses out the edge of the seam paper, and then apply another layer of caulking paste on the seam tape. >>>More
Gypsum board ceiling selection materials, exquisite workmanship, high stability, void joints do a good job is not to appear expansion problems, Sumei Jijia decoration of gypsum board ceiling using non-toxic and non-radiation: KNAUF gypsum board uses corn starch as a binder, non-toxic, harmless, no skin allergies, does not release any radioactive harmful substances, and meets the national class A building materials radionuclide limit requirements.
The expansion bolt that fixes the bar is selected in the wrong position. Re-punch the hole in the appropriate space around and tighten the spot weld with a nut with a thickness of 50 50 iron plate 3 4mm. >>>More
There is no better way but to use a good cloth for closure and then use elastic putty treatment.