-
Anonymous users2024-01-24The low suction power may be due to the blockage inside or the lower drain is not aligned! The high water level can be adjusted! Personally, I think it's more likely that your toilet is clogged inside or inside the sewage pipe! It is recommended to remove it and check it out! ~
-
Anonymous users2024-01-23I suggest that you do not use a flange ring, you must use a flange ring with glass glue, and it is better to install the toilet with white cement, your problem should be the problem of toilet installation, or the quality of the toilet.
-
Anonymous users2024-01-22The suction power is small, and it is estimated that your drain is displaced, and you need to use a shifter.
The contact of the water parts is not good, and there are many impurities in the water tank, sometimes the impurities block the water outlet, and sometimes the impurities are washed away, and it is happy again, or change the cleaning water parts, if you often clean the water tank.
I have encountered it, if it is not due to the blockage, the toilet is not well designed or not tightly closed.
Siphon type generally to use the water flowing out of the water tank, as long as the drainage pipe is not blocked, the toilet is no problem should be due to the small water storage, the water can be adjusted to the water valve, try to get a higher water level, not more than the overflow can be, try it.
If it's blocked, find someone to clean it up, and if you want, you can also buy your own tools to clear the blockage.
First of all, in principle, the siphon toilet is easy to flush off the dirt that adheres to the surface of the inner wall, while the straight flush toilet has a large diameter of the sewer pipe, which is easy to flush off the larger dirt. They all have their pros and cons, and they all have their worries and worries. >>>More