Why is there always mold inside the sawdust board to make furniture Is there any way to solve it Tha

The board made of sawdust also has a good or bad process, the general plate pressing strength is not enough, and it is easy to break, because the sawdust is easy to breed fungi, it will ferment the board when it is damp.

The fundamental solution is not to use, but for economic reasons, hehe I also use a composite computer desk box cabinet, if you must buy it, you must have a good quality:

1. Look at the flatness of the surface, the flatter the pressure, the more it indicates that the plate is porcelain.

2. It is to look at the waterproof treatment of the surface, if there is a broken board, you can quickly see that the wood residue inside is different from the paint or surface layer outside, and the good face will greatly reduce the probability of mold of furniture.

There is also the gap between the home, if there is a joint on the surface that you can't usually see, you might as well apply some waterproof adhesive to it yourself.

The sawdust board is mainly pressed with sawdust and glue, the taste is mainly the taste of glue, maybe your sawdust board is not of high quality, you can use vinegar to put it in the furniture to taste, you can also go to the building materials market to buy a special deodorant, the effect may be better, but the principle of deodorization is almost the same, are adsorption. Due to the poor air permeability of the sawdust board, if the ambient humidity is too high, or the humidity of the things in the furniture is too high, the moisture inside will not be able to escape, and it is easy to mold, so you can put some mildew-proof and dehumidified things in the home (such as bamboo charcoal, cherry blossom anti-mildew tablets, etc.), and there are many in the supermarket.

When I bought it, it wasn't good, but now the sawdust must have been damp, so it's always moldy, think about it, do it smell good? There's also the smell of glue, which is why you didn't make furniture when you first made it! There is basically no good way to solve it, only to change the set, otherwise it will be bad for the body after a long time!

Analysis:1. For quality problems, you can find the merchant to make a claim.

2。Put the clothes in the cabinet before they are thoroughly dried, and put them in the cabinet after the clothes are thoroughly dried.

3。There was too much humidity in the house. Take out all your clothes, open doors and windows, and ventilate strongly to reduce indoor humidity. If necessary, use a hair dryer or heater to assist in dehumidification. After the furniture is dried, apply 2-3 coats of varnish to the furniture in time to avoid moisture absorption and mildew.

Get your feet wet?!