There is no flue in the kitchen of the house, and the range hood is installed outside the room in a

Updated on Kitchen 2024-07-05
5 answers
  1. Anonymous users2024-01-24

    If it is on the first floor, you can actually discharge the fumes directly under the sewer, so that you can avoid rain flowing into the pipes when it rains, and you can avoid the wind. The direction and location of the fourth smoke pipe outlet, because this practice of directly discharging the fumes to the outdoors, especially in some communities, will more or less affect other households. Long-term fume emission will leave serious traces of fume on the wall or window corresponding to the discharge outlet, which is difficult to remove after a long time.

    Therefore, the position and angle of the fume emission must be adjusted before installation.

  2. Anonymous users2024-01-23

    If the kitchen of the house does not have a flue, but you want to let the fume go outside, you can connect the smoke exhaust pipe with the public flue, and use the public flue to exhaust the fume to the outside.

  3. Anonymous users2024-01-22

    If there is a public flue at home, it can be directly drilled and discharged outside, which can basically be solved by a check valve. It can also be discharged by using a range hood with high wind pressure.

  4. Anonymous users2024-01-21

    The house without flue is generally a design problem, usually using a special rhinestone to punch holes in the wall, the height should be moderate, too high or too low will cause the kitchen smoke to not be discharged, or the smoke backs up into the kitchen. A special barrel needs to be placed at the mouth of the smoke pipe to receive the e-liquid.

  5. Anonymous users2024-01-20

    If you want to change seats, then you can buy a long pipe for the range hood, and then install it to do so, and you don't need to open up any space.

Related questions
4 answers2024-07-05

This depends on whether it is an independent household, and if it is an independent household, then it can be independently transformed according to the site. If the flue of a high-rise residential building is shared, then the flue cannot be relocated.

5 answers2024-07-05

The exhaust duct of the range hood is generally painted in a good position or has been opened, and the bricklayer can be cut out with an angle grinder when tiling, or the carpentry of the ceiling can be, generally this hole is on the ceiling, and the decoration has little impact, just remember to check whether there is a check valve before the installation of the range hood. Empty first, then apply tiles.

1 answers2024-07-05

Mostly no.

A residential kitchen refers to a dedicated room for cooking. >>>More

5 answers2024-07-05

The kitchen should be equipped with a flue check valve to prevent the airflow from going backwards and forcing the flue gas to move in one direction. >>>More

3 answers2024-07-05

If it is a cabinet under the stove, it is not in conflict with the range hood, it is okay to do it successively, if it is a cabinet on the wall, it is necessary to consider the size of the range hood, it is best to install the range hood first and then let the cabinet customization company measure the actual size, in order to facilitate the installation of cabinets in the future!