-
Anonymous users2024-01-24Steps? This one!!! It's easy! There are no steps! First sprinkle the glue on the iron plate façade, and then specially brush the plastic plate!
-
Anonymous users2024-01-23Dalian Huagong glue brushing machine automatic glue brushing, uniform, high efficiency. Put the door panel to be brushed on it, fully automated.
Yongkang Door Expo when I saw this factory, I didn't care much about it, there was a door fair in Shanghai on September 28, and I will help you pay attention to it at that time.
Removal method:
1) After the styrofoam gets on the door, don't touch it, wait until it dries, just shovel it off with a shovel, and then wipe off the mark with gasoline thinner, be careful not to shovel off the door skin. >>>More
The poor viscosity is basically the kind of glue on the market. Or choose some good brands of glue, and use it with confidence.
After the foam glue is dry, just cut off the excess with a wallpaper knife! It's very convenient.
You can use this practice.
After the installation of the anti-theft door, the gun and the wall are not necessarily very, very suitable, so there are some gaps, but this gap may be able to make the outside wind through the gap to the home, so you use styrofoam to fill the gap, and later outside, it is okay to use cement wind speed. >>>More