Flush the toilet water heater inlet sounds

One: Hello, first solve your most pressing problems"A leak in the water heater inlet will not explode; 'The water heater has multiple protections, 1 leakage, 2 temperature control; 3. Relieve pressure.

Two: As long as the water can be heated, you can continue to use it. You can find a lessor to repair the water heater, this is his thing, and you have to inform him if you repair it, otherwise if there is any accident, the lessor will say that you deliberately damaged his finances.

Three: When maintenance, we must first determine the leakage point, and the nut can be tightened again, and do not disassemble it at the beginning. If the location of the leakage is loose, it should be no problem after tightening, if not, then disassemble, because I don't know the pipeline structure and materials used in your water heater, I will tell you that the tools and spare parts are needed for general pipeline maintenance:

two movable wrenches; Raw tape, gasket (I buy it according to the size of the water pipe). Finally, tell me that if you are troublesome, you can hire a foreman to get it, and if you don't understand, you can steal a teacher, and you can solve this kind of problem alone in the future, no! Good bye!

Hope it helps.

The resonance phenomenon caused by the flow of water in the water pipe is physically called the water hammer phenomenon. It would be better to turn on and off the faucet more slowly.

Water hammer is called water hammer when there is a sudden power failure or the valve is closed too quickly, due to the inertia of the pressure water flow, the water flow shock wave is generated, just like a hammer strike. The force generated by the shock wave of the water flow back and forth, sometimes very large, destroys the valves and pumps. The "water hammer effect" refers to the fact that the inner wall of the pipe is smooth and the water flows from the mu to the inside.

When the open valve closes suddenly, the water flow will produce a pressure on the valve and the pipe wall, mainly the valve. Due to the smooth pipe wall, the subsequent water flow quickly reaches the maximum under the action of inertia and produces a destructive effect, which is the "water hammer effect" in hydraulics, that is, positive water hammer. This factor should be taken into account in the construction of water conservancy pipelines.

On the contrary, after the closed valve is suddenly opened, it will also produce a mu of dry water hammer, called negative water hammer, which also has a certain destructive power, but not as large as the former.

The reason is that gas enters the water pipe, and the flow of water in the water pipe causes the gas to vibrate the water pipe. The solution to the vibration of the water pipe is very simple, that is, open the water pipe with the surrounding neighbors, and discharge the gas in the water pipe from the Xunnai hole, so that the water pipe will not vibrate. If you have more questions, you can click ID to consult.

This is a normal phenomenon, just a backlash of cold water in the New Year. When the flush valve is opened, the water pressure will drop rapidly, and the water pressure will rise quickly after the valve is closed, and there is a recoil on the water heater.