The phone fell into the toilet, tried to turn it on, but it didn t work, the screen was black, what

If you are using a vivo mobile phone, the liquid inlet treatment method of the mobile phone:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo mall APP--my--outlet query or vivo official website web version--bottom of the slide--service support--service network query--select the province and city to query the customer service center address.

Maybe this circuit board inside is flooded, and then, he can't use it, well, go to this place to repair the phone, let him open it, clean it up, and see if it's burned and soldered again.

Don't try to turn on the machine again, it is recommended to send it to the after-sales inspection in time.

The first reaction should be to turn off the machine and dry it slowly with a hair dryer. And what you're doing is forcing a short circuit in the water phone.

There is no way, it must be that some components are burned out, either go and repair them, or buy a new one.

Generally speaking, there is no need for maintenance if the maintenance cost exceeds 30% of the total value, except for the need for maintenance, such as important information, video, audio, etc.

Send it for repair, what else is there to say, or change it.

Personally, I suggest that you change it to another one, and use it with flavor.

The phone fell into the toilet, and it can be used when it is picked up and turned on, and then it slowly breaks. This is the mobile phone over the water, at the beginning the water has not completely entered the internal circuit of the mobile phone, so it can be used temporarily, slowly the water wets the line, and the mobile phone is broken. It is recommended to go to the repair department to see if the damage is serious and whether it can be repaired.

The motherboard is corroded, don't repair it if it's not very expensive, you can't draw it.

If the mobile phone falls into the water, it will naturally enter the water. The best thing to do is to take it to a professional phone repair shop for repair.

The repair value of the water machine is very low, and many of the original parts inside the mobile phone will be burned, even if the water stains are obvious after drying, problems may occur after repair, look at finding a new mobile phone for a new one.

Put the phone in the rice and suck the moisture and you're fine.

The motherboard of the phone has been corroded by the liquid and must be replaced. You shouldn't have turned it on at all, but you should blow dry it right away and wait until the water is completely dry before trying to turn it on. If you do that, you're done.

The phone fell into the toilet, tried to turn it on, but it didn't work, the screen was black, what should I doThen you can take it to the night market to repair it, and the people there will just take a look at it again.

After the mobile phone is over the water, most of the mobile phones are unusable, you can take the mobile phone shop to repair it to see if you can repair it, and replace it if you can't repair it.

Wrap your phone in toilet paper and put it in the rice.

Then cover the phone with rice, take it out and turn it on three days later.

Do not turn on your phone during this period.

Good luck with you.

The mobile phone fell into the toilet, and it can't be turned on, that's because the mobile phone is flooded, and you must not turn it on at this time, and the mobile phone can't be repaired once it's turned on, because the short circuit of the mobile phone motherboard will cause damage to the mobile phone, like you, it can only be scrapped, because the repair cost will be very expensive, and it is better to buy a new mobile phone.

If the mobile phone falls into the water, you must turn it off quickly, and then ask someone familiar to help open the back cover, wipe it carefully with a cotton ball, and ventilate it for four hours before you can test it. If you can't turn on the display normally after the test, you have to go to the maintenance department. Repaired.

The following are some tips given by several netizens, if you encounter a black screen in the water on your phone, you might as well try it.

Method 1: Dry with a hair dryer.

I fished up my phone when it fell into the toilet, and when I took it up, it was a black screen, after all, it was fished up from the toilet, so I rinsed it with water again. Then remove the battery. card and memory card, take the napkins to blot the water, and then shake the phone to try to get the water out.

Then I used a hair dryer to blow my phone, and the cold and hot air blew alternately, and after a while, there was a layer of fog on the phone screen. After blowing for a long time, there was still a layer of water mist, so I tried to install the battery and turn it on. Wow!

But the music card that turned on, I removed the battery and continued to blow, and the sound was fine in a few days, everything was normal.

If you take it to repair, people will also blow dry the mobile phone and turn it on, so it is better to blow it at home, save money and accumulate experience.

To say that this netizen is really a god, but luck is good enough!

Method 2: Do not press any buttons to avoid water seeping into the circuit board.

To make it short-circuited usually naturally dry the moisture inside, it takes a week, if it has been pressed to turn on or the screen is black, then it means that the circuit board has been burned. If the mobile phone is a brand mobile phone such as Nokia or Sony Ericsson, it will cost more than 600 to go to the maintenance department to replace the circuit board, and even if the mobile phone is replaced, the performance is not as good as before. It is recommended to take the phone to the repair department for a professional to see.

In short, if there is a black screen after entering the water, either the liquid crystal is burned or the cable is burned, just replace it. It's better not to move yourself, if the LCD screen is not broken, and you pry it if you pry it out, the gain outweighs the loss. Find someone to repair it, the cable is generally sold for 40 to 50, and the LCD screen can be a little more expensive, 50 to 100, according to the size of the mobile phone screen.