If I don t want to hit the floor if the bathroom leaks, can I fix it in other ways?

The main thing to see is the location of the water leakage, if it is a waterproof layer leakage, you don't need to hit the ground, and you basically need to hit the ground in other situations.

1. If the bathroom is leaking from the waterproof layer, rather than the water from the upper and lower water pipes, it can be repaired without smashing the ground. The maintenance method is very simple, that is, use a new type of penetrating waterproofing agent to waterproof the surface of the bathroom again, so that the water does not enter the ground and flows directly from the waterway.

2. If it is a problem with the upper and lower water pipes, and the water pipes are underground, you need to consider smashing the floor, but it is not necessary to redecorate the bathroom. For example, if the inlet pipe is leaking, you can change the pipe to avoid the leaking pipe.

3. If it is a leakage of the sewer pipe, it is also necessary to find the specific location of the leakage, and determine that it is partially planed bricks to solve it according to the situation, and it is not necessary to smash them all.

If it is a crack in the sewer, replace it, and if it is a crack in the floor tile, you can use silicone to apply it to find out the cause of the leakage first.

There are two main reasons for the leakage of the bathroom, one is that there is a leak in the waterway of one's own house, and the other is that the top layer of waterproofing is not up to standard. You can ask the master to check whether the sewer pipe is not tightly closed, focusing on the water pipe of the basin and toilet, and the workers may damage these two places if they do not pay attention during the decoration.

Do these two steps, first, test whether the water inlet pipe is leaking. Second, the drain pipe is leaking test.

If the problem of water leakage can not be solved, you need to redo the waterproofing of the bathroom, which is a big project, which will destroy the floor tiles that have been paved, and will also produce a lot of costs, but the re-standard waterproof construction can not only solve the leakage problem, but also avoid the phenomenon of moisture return and mold on the wall in the future.

How to deal with bathroom leakage downstairs, bathroom leakage without smashing bricks The key to maintenance methods is to save money.

If the bathroom leaks if the water pipe is not leaking, it can be repaired without dismantling the bricks, and the hairy ants will be repaired for you in one day, which is not a very troublesome thing, don't worry.

If the bathroom leaks and smashes the floor, it is troublesome enough and the cost is high. There is a way not to destroy the floor tiles, which household can be done from below, make a few holes under the bathroom at home, of course, it will not be opened, put the water-stopping needle in, and then use a high-pressure grouting machine to press the waterproof glue in. A water-stopping needle can spread over an area with a radius of 15 cm.

This kind of maintenance method is good, and the leakage in the bathroom is like this, and it can be maintained for many years without leakage.

The general method of toilet leakage is to dig the floor and pry the waterproof layer, and then re-do the waterproof, of course, such a method is laborious and costly, there will definitely be a simple way, that is, in the place where the toilet leaks, apply CPC leakage inhibitor on the tile gap, you can, the method is so simple, it really does not leak after coating, as long as the floor is not broken, the leak-proof effect has been.

CPC leak preventer can be seen in Taobao.

Leakage of water from the inlet pipe.

The way to judge the leakage of water from the inlet pipe is that after the toilet is closed for water ingress, the dripping downstairs stops. Open the bathroom to get water, and the dripping downstairs continues, and the drip frequency does not change. Such leakage is the phenomenon of leakage in the inlet pipe.

The specific method of determination is measured by the plumber pressure. It is possible to determine which broken pipe is leaking water.

Leaking water from sewer pipes.

The way to judge the leakage of water from the sewer pipe is to flush the water into the drain, hand basin, toilet and other sewer pipes, and do not pour water on the ground. Flush for 1 hour and observe the leakage phenomenon downstairs. The frequency of water leakage is accelerated and aggravated, and it can be judged as leakage water from the sewer pipe.

Water leakage from the waterproof layer.

The judgment method of waterproof layer leakage is to plug the floor drain, put water on the ground, wait for about an hour, observe the dripping situation downstairs, if it is aggravated, it can be judged as the leakage of the waterproof layer, the three leakage methods are different, the leakage of the inlet pipe is manifested as continuous dripping downstairs, and the leakage of the sewer pipe is generally aggravated after the use of sewerage, such as after washing clothes, the leakage of the sewer pipe is aggravated when washing in the morning and evening, and the dripping is reduced when not in use. The leakage of the waterproof layer is not serious, the situation of yin water is more, there are some serious dripping, the more you take a shower, and the downstairs begins to leak and drip.

There are three methods of water leakage maintenance: the water pipe can be replaced for leaking water from the inlet pipe, and the original water pipe can be discarded and the water pipe can be reconnected, that is, the open pipe can be walked. Leaking sewer pipes need to be replaced after planing bricks, and then waterproofed and re-used, or not using leaking sewer pipes.

Or casing, use a thin pipe to cover the leaking sewer pipe, and let the water go through the inner channel of the casing. The middle part of the original pipe and the new pipe needs to be closed.

Water leakage from the waterproof layer generally manifests itself in many cases. If the ground waterproofing is not done well, it may lead to water stringing at the door, blister floor, anti-water wall, leakage and mildew after water spraying the wall, and leakage downstairs along the gap of the pipe floor. In this case, the waterproof layer leaks water, and there are generally more leakage points downstairs.

Solution: waterproof layer leakage can be solved without planing bricks to do waterproofing, waterproof company provides bathroom tile surface leakage water repair three customer products, including penetrating waterproofing agent, caulking waterproof paste, plastic steel mud, three materials are used together to do waterproofing on the surface of the tile, and easily solve all the problems of waterproof layer leakage.