How to change the vent when the toilet is bubbling

Updated on Toilet 2024-07-21
1 answers
  1. Anonymous users2024-01-24

    It should be that there is an air blockage inside, which may be a blockage of the ventilation port on the roof, resulting in poor internal exhaust, and the more and more gas accumulates, forming a slight positive pressure, so when the toilet is flushed, the gas will be impacted everywhere.

    It is recommended that the landlord find a professional master who dredges the sewer.

Related questions
1 answers2024-07-21

Hello. It is necessary to pay attention to whether the blockage will affect the discharge of wastewater. If it doesn't affect it, it's fine. When decorating, we should pay more attention to the design of the pipeline, so as to facilitate life. I hope it can help you, hope to adopt!

1 answers2024-07-21

1. According to the construction operation procedures of U-PVC drainage pipe, on the riser of the toilet on each floor. >>>More

2 answers2024-07-21

You can open the doors and windows of the room, the toilet door to ventilate, and you can also pour coffee grounds into the corner of the toilet, and you can also drip toilet water.

2 answers2024-07-21

If the toilet is like this at the beginning, it may have been displaced because the hole spacing was not suitable; If it is because it is a long time later, it may be that the sewer pipe is not good, it may be blocked, or there is dirt in the tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling.

4 answers2024-07-21

If the hot water pipe is buried, then you can only unload the pipe and plug it with the pipe, and then lay a cold water pipe, you can only go to the open pipe, if you have not yet pasted the tile then it is easy to do, directly connect the hot water pipe to the cold water pipe.