Is it better to use the floor for geothermal heating to be composite reinforcement or solid wood lam

The most suitable flooring for geothermal heating is first of all multi-layer solid wood, followed by laminate flooring, and then three-layer solid wood. Because there are many layers of multi-layer solid wood flooring, the stability is good, which is about 1/22 to 1/15 of the deformation rate of solid wood flooring. On the premise of the first choice of multi-layer solid wood, the thickness of multi-layer solid wood is mostly about 15mm on the market, of course, there are 12mm, but only a small part.

12mm multi-layer solid wood is relatively good for thermal conductivity and good heat storage performance. Can run more than one home improvement market. With more experience, you can distinguish between good and bad, and you can also become an "expert"!

First of all, it should be made clear that not all laminate flooring can be used for geothermal heating, and the quality of cheap laminate flooring cannot be guaranteed. In addition to the general physical and chemical indicators of laminate flooring, the following indicators need special attention: The surface has good heat resistance, and cannot crack, discolor and degumming; Good moisture resistance, can not expand, tile change; The surface is moisture-resistant (paint products are prone to discoloration); Resistant to dry heat; Resistant to hot and cold cycles; environmental indicators (the higher the temperature, the higher the volatile matter volatilization rate); Good thermal conductivity; Good dimensional stability, prevent floor deformation, etc.

Tiange flooring is the world's leading brand of geothermal flooring, and it is also the drafting unit of domestic geothermal flooring, focusing on geothermal heating, and all of them are locked floors, so they can withstand the cold and hot changes of temperature to the greatest extent, and it is recommended that the landlord consider it.

Both are not good, it is better to be pure solid wood, he did not do paint, it is long, environmentally friendly, it does not contain any glue, it will definitely not be deformed, because it is a hardwood imported from the United States, and the pure solid wood floor of American Muxiangju.

Wood flooring, composite board and solid wood, of which the composite board is cheap, solid wood is expensive, but like floor tiles, if the composite board has friction and discoloration, there is no way, solid wood is better, you can move the furniture out over the years, re-grinding, painting, repeated use, depending on your economic ability, add a point, solid wood flooring to prevent Timu's fooling you, the layman can not see, the surface is only millimeter thick wood, in fact, it is a laminated board, such a floor can not be renovated. The solid wood floor is made of pineapple lattice, which is hard, friction-resistant, and impact-resistant, and our pointed high heels are not broken. The price is not very clear, I just make plates, and I don't know the finished product.

However, if you can buy solid wood for 300, you should ask whether it is pasted, whether it is miscellaneous wood, wood hardness, and so on. Note: The teak floor is water-resistant, and the bubble is not broken.

Huili has a solid wood composite that is very suitable for floor heating. The name of the set is Balinese.

Good value for money. And the suit is very good. You can take a look at it on Huili's website.

Laminate flooring is very hard, the cup falls on it is the cup is broken, if the child or the elderly fall down will be like falling on the floor tiles, and his process requires a lot of glue, so the glue must be environmentally friendly to be harmless to people. The advantage is that the price is cheap. Because the surface is not wood, all the boards are printed as if they were printed out of a photocopier.

Parquet, is wood, he has a natural texture and color, can be compared to leaves, each piece is different, the texture is softer than the fortified, suitable for families with small children. The disadvantage is that the price is more expensive, because after all, it is made of wood, and the process is not comparable with laminate flooring.

PAVING GEOTHERMAL, ANY KIND OF CAN BE, AT PRESENT, IT IS SAID THAT 10MM IS SUITABLE FOR GEOTHERMAL HEATING, BUT 14MM CAN ALSO BE USED TO DO GEOTHERMAL, PAVING WITH NO KEEL, IF YOU MUST SAY THAT BECAUSE HE IS A FEW MILLIMETERS THICKER THAN THE STRENGTHENED TEMPERATURE IS SLOWER, THE SAME REASON FOR THE THERMAL INSULATION TIME IS ALSO LONG.

Therefore, my advice is to live in your own home or use parquet.

The compound reinforcement is good, the Furen brand has not heard of it, so buy the brand of SITA! After all, it's a big brand!

Of course, it's good to be solid wood. Toyo multi-layer hardwood flooring is recommended.